Vertical Electromagnetic Brake Technique and Fluid Flow in Continuous Casting Mold

来源 :第十届中国钢铁年会暨第六届宝钢学术年会 | 被引量 : 0次 | 上传用户:slhulala
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  This paper proposed a new type electromagnetic brake technique that called vertical electromagnetic brake(V-EMBr),which applied to the slab continuous casting process.A three-dimensional mathematical model is developed to describe molten steel flow and the interfacial behavior of molten steel/liquid slag in the mold with vertical electromagnetic brake,considering the coupled effects of electromagnetic field and flow field.The effect of magnetic flux density,casting speed and the submergence depth of the SEN on flow field in mold with V-EMBr are investigated by numerical simulation method.Meanwhile,the effect of current density on the interfacial behavior of molten steel/liquid slag is also investigated with Volume of fluid(VOF)model.The results show that the application of V-EMBr can play an effect control to the molten steel in the mold,and significantly reduce the flow intensity in upper recirculation zone,decrease the impact strength of jet flow on the narrow face and the flow velocity of molten steel in the free surface of mold.At the same time,the height of molten steel/liquid slag interface can be obviously depressed by V-EMBr with increasing of current density,which is beneficial to reduce the possibility of mold flux entrapment.
其他文献
  本文主要从冷轧带钢表面质量的影响因素和原理入手,利用系统分析方法,对冷轧带钢表面黄带、锈蚀的影响因素进行探讨,对比了终冷台生产工艺、钢卷库区存放、平整液、空气吹扫
  取向硅钢和IF 钢增碳量存在较大差异.取向硅钢因成分和脱氧工艺产生低碱度渣,该渣易于侵蚀MgO-C渣线,使之产生结构性剥落,而MgO-C 渣线具有较好抗IF 钢的高碱度氧化性渣侵蚀
  430是应用十分广泛的一种铁素体不锈钢。本文对比了国内外430 钢种的生产工艺,分析了宝钢生产430带钢出现表面脏污的原因,并提出了改进对策。保证Na2SO4 溶液的清洁,适当提
介绍了CY-1.5型铲运机在采矿试验中的应用情况。通过对其运行要素的观察测定和分析计算,说明CY-1.5型铲运机的运行状态是正常的,并从中得到了有关对我国小型新矿山的建设和老
随着生产水平的日益提高,水稻不仅被作为重要的粮食作物,还被作为经济作物和饲料作物,具有巨大的开发利用价值,因此,它对我们的生活和生产越来越重要。尽管近几年水稻的产量和品质都有所提高,但是仍然受到许多不利条件的影响。当前,进一步培育新的水稻品种才是我国农业科技发展的重要工作,利用分子生物学技术和植物基因工程方法,成为解决此项工作的新的有效手段。在细胞中,有限的蛋白磷酸酶和很多蛋白激酶共同维持着蛋白磷
  The salt spray laboratory corrosion test was introduced as an ASTM standard more than 100 years ago,and even today it is the most commonly performed method.
会议
  To simulate edge milling process of the milling machine of a UOE welding pipe line,the geometric models of milling cutters and steel plate were built by Pro
会议
  根据单种煤变质程度,焦炭灰成分催化指数模型(MBI,MMCI)选取了9 种单种煤焦炭,缩取焦炭破碎制成0.2mm 以下的焦粉,将每种焦分别在同步热分析仪中进行程序升温的高温反应
英语教师在初中英语的课堂教学过程中需要灵活地运用英语教学方法,尤其是需要优化课堂的导入环节,为学生创造一个轻松的学习氛围,有效地激发他们的学习兴趣,让学生能够积极主
期刊
涂层防腐是目前应用最广泛、最经济实用的防腐方法。环氧树脂分子中环氧基、羟基等极性基团存在,使其对金属基体具有良好的附着力;主链上只有极性较小、稳定的C-C键和醚键使环氧树脂具有良好的耐蚀性能。为适应环保的要求,水性环氧防腐涂料得到发展,但同样存在交联固化后密度高,抗冲击韧性差、性脆、易开裂等缺点。聚苯胺防腐涂料具有独特的耐蚀机理,防腐性能优异,但聚苯胺单独成膜附着力低,聚苯胺具有难溶性,这对其应用