【摘 要】
：
The morphology and corrosion behavior of Ni/Al2O3 composite coatings prepared using double-pulsed electrodepositing technique after oxidized under 800℃ NaCl de
【机 构】
：
Department of Environmental and Chemical Engineering,Department of Basic Medicine
论文部分内容阅读
The morphology and corrosion behavior of Ni/Al2O3 composite coatings prepared using double-pulsed electrodepositing technique after oxidized under 800℃ NaCl deposit in air environment were analyzed by scanning electrical microscope (SEM), X-ray diffraction (XRD) and energy dispersive spectrum (EDS). The results showed that the corrosion of all composite coatings was accelerated under NaCl deposits, and the corrosion products were rather porous with poor adherence to the matrix. Al2)O3 particles in the coatings can refine the grain size and improve the high temperature corrosion resistance of the coatings. Within the test scope, the more Al2O3 particles in the coatings, the lower corrosion rates could be obtained, and the corrosion mechanism was also discussed.
其他文献
The influence of thermo cycle times under variant loads and environment temperatures on the properties of Cu-16.4Zn-4Al (Re) SMA component was studied by thermo
在辽阳城东60里，有一个村子，名叫柳河汤，也就是现在的弓长岭区汤河镇柳河村。在这个村里有一眼水井，是八角形的。
辽宁省地热温泉资源分布广泛，对地热资源的利用距今已有1250余年的历史。目前辽宁省14个市都发现了地热资源，具有得天独厚的资源优势。
A PGSTAT 30 and a BOOSTER 20A were used to measure cell impedance. Electrical conductivity was gained by the Continuously Varying Cell Constant Technique. Elect
Nafion/polypyrrole and Nafion/Dimethysulfoxid (DMSO) organic coatings were prepared on the surface of pure magnesium by simple immersion and heat treatment. The
Two kinds of CBGA (ceramic ball grid array) assemblies were made by reflow soldering process using two different Pb-free solders. Microstructural evolution and
探讨了在居室设计教学中应注重培养学生的设计性、市场性、技术性、协作性意识。
The technique of microwave irradiation induced free radical bulk- polyaddition reactions in porous wood flour was used to modify wood flour. The behaviors of th
Tb0.22Dy0.48Ho0.35Fe2 quaternary alloys are prepared by melting-top casting-annealing process. X-ray diffraction reveals that the alloy is single phase polycrys