论文部分内容阅读
图1所示是多工位铣床夹县,用于加工铀类工件组的叉槽或其他沟槽,工件工艺简图如图2。本夹具通过定位键16,安装在铣床工作台上。基体1上装有由螺钉3、圆柱销4、支座2和螺钉18、圆柱销19、支架14以及螺钉20及定位板15组成Ⅱ形定位框。左、右压板8,以弹性滑块组5的宽度为定位基准,用圆柱销7定位,螺钉6固紧构成燕尾形导槽。组装在支架14螺孔内的夹紧螺钉12的左端,用螺
Figure 1 shows a multi-position milling machine folder county, for the processing of uranium workpiece fork group or other grooves, the workpiece process diagram shown in Figure 2. The fixture through the positioning key 16, mounted on the milling table. The base body 1 is provided with a Ⅱ shaped positioning frame composed of a screw 3, a cylindrical pin 4, a support 2, a screw 18, a cylindrical pin 19, a bracket 14, a screw 20 and a positioning plate 15. Left and right platen 8, with the width of the elastic slider set 5 as the positioning reference, with a cylindrical pin 7 positioning, screw 6 is fixed to form a dovetail guide groove. The left end of the clamping screw 12 assembled in the screw hole of the bracket 14 is screwed