Preparation of Al(OH)3 by ion membrane electrolysis and precipitation of sodium aluminate solution w

来源 :中国有色金属学会会刊(英文版) | 被引量 : 0次 | 上传用户:network_worm
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The preparation of Al(OH)3 by the ion exchange membrane electrolysis followed by the precipitation of sodium aluminate solution with seeds was made. During the process of ion membrane electrolysis, the sodium aluminate solution is rapidly acidified and the caustic ratio (aK) is decreased due to oxygen evolution in the anodic region. And the causticity of solution is increased due to hydrogen evolution in the cathode region, producing the high concentration of caustic soda solution. Regulating the acidity of the anodic solution by controlling the electric quantity in the electrolysis and subsequent decomposing the solution, Al(OH)3 could yield with very large rate and high efficiency. The experiments also indicate that the quality of aluminum hydroxide product is greatly affected by the impurity silicon.
其他文献
Microreaction technology is one of the most innovative and rapid developing fields in chemical engi-neering,synthesis and process technology.Many expectations t
Under certain conditions of proper temperature and pH value,sodium silicate was hydrolyzed in liquid ammonia chloride,and spherical microfine SiO2 powder in mic
This review summarizes the various techniques developed for fabricating nanotube arrays in porous anodic alumina membranes (AAMs). After a brief introduction to
The effect of Zn on the microstructure, the mechanical property and the corrosion property in simulated body fluid(SBF) of an extruded Mg-Mn alloy was studied.
水稻旱种,是从水稻旱直播发展而来的,是在旱地状况下直播、苗期旱长、中后期利用雨水和适当灌溉以满足稻株需水要求的一种种稻方法.水稻旱种,不仅比普通水田稻节省灌溉用水25
Aqueous precipitation and deposition-precipitation method were used to prepare CeO2 supports and Au/CeO2 catalysts, respectively. The effect of preparation cond
We present a brief review about recent results regarding carbon nanotube (CNT)-based chemical and biomolecular sensors. For the fabrication of CNT-based sensors
Nanocrystalline Gd1.77 Yb0.2Er0.03O3 samples were prepared by combustion and precipitation methods.Structures and upconversion luminescence properties of sample
YbCl3-MCl (M = Na, K, Rb, Cs) systems were optimized and calculated using the CALPHAD (CALculation of PHAse Diagram) technique. The modified quasi-chemical mode