在建筑工程的基础施工中,有时由于某种原因使基础的平面轴线位置发生偏移造成工程事故。对于产生这种工程事故的技术处理,有的采用基础加固;有的采用将基础报废,清理后重新施工等。这些方法虽都有可行的一面,但也都存在着不足之处,如将基础报废重新施工,虽然问题处理彻底,但经济损失较大。采用基础加固法,由于两次施 In the foundation construction of a construction project, engineering accidents may sometimes occur due to the offset of the plane axis of the foundation for some reason. For the technical treatment of this kind of engineering accident, some use the basic reinforcement; some use the foundation scrapped, cleaned up and re-constructed. Although all of these methods have a feasible aspect, they all have their own shortcomings. For example, re-constructing the basic scrap, although the problem is handled thoroughly, but the economic losses are large. Basic reinforcement method, due to two applications