Measurements of crystal structures, electrical and magnetic properties for the electron doped BixCa1-xMnO3 (0<x≤0.33) reveal the presence of a variety of notabl
The corrosion behavior of typical high-strength aluminum alloy LY12 was studied by accelerated corrosion tests of cyclic wet-dry-immersion containing media of N
Using ploughing-extrusion method, a cross-connected finned micro-grooves structure was formed on the surface of copper strips with thickness of 0.4 mm. The stru
A miniature thermoacoustic prime mover, consuming heat to radiate sound, may be considered as a potential way of heat management in microcircuits because of its
This paper presents the restraining moments of outriggers acting on the core wall and the equation of the horizontal top deflection based on a simplified outrig
Copper alloy was adopted to prepare helicopter rotor counterbalance component by means of permanent-mold casting. Process parameters were determined on the basi
The parabolized stability equation (PSE) was derived to study the linear stability of particle-laden flow in growing Blasius boundary layer. The stability chara
The chemical structures of four types of superplasticizers (SPs) and their adsorptive behaviors on β-C2S were investigated. The adsorption properties of SPs on
The continuous extrusion forming process for producing large section copper concave bus bar under different extrusion wheel angular velocities was studied by th