【摘 要】
：
We demonstrate the theory of chromatic dispersion (CD)-induced constellation rotation (CR) in a radio-over-fiber (ROF) link and a method for compensation. We also propose a 60 GHz full-duplex ROF system with vector signal transmission including no CD effe
【机 构】
：
StateKeyLaboratoryofInformationPhotonicsandOpticalCommunications,BeijingUniversityofPostsandTelecomm
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
We demonstrate the theory of chromatic dispersion (CD)-induced constellation rotation (CR) in a radio-over-fiber (ROF) link and a method for compensation. We also propose a 60 GHz full-duplex ROF system with vector signal transmission including no CD effect. The evaluation of 5 Gb/s 16 quadrature amplitude modulation signal transmission shows that the CD-induced CR can be entirely overcome due to the proposed method which is simply implemented through an optical phase shifter. The proposed ROF schedule is not only applicable for V-band (57–64 GHz) but also fits for W-band (75–110 GHz), or any other bandwidth.
其他文献
利用 SiO2作为激光薄膜的保护膜,可以提高抗激光强度1～3倍,从等离子体闪光和薄膜缺陷破坏两个方面给出了解释。
从生物化学和蛋白质的裂解机制出发,提出一种新的重铬酸盐明胶(DCG)浮雕形成方法――化学裂解刻蚀法。由于化学裂解试剂较胰蛋白酶具有少得多的作用位点,化学裂解方法比明胶酶蚀方法具有更高的刻蚀分辨率。实验考察表明,化学裂解方法可以获得500lines/mm的刻蚀分辨率。应用化学裂解方法,利用投影曝光系统和灰度掩摸,制作了单元线宽为30μm,深度为0.8μm的连续浮雕明胶微棱镜列阵。
利用矢量有限元法,研究了加载右手材料和左手材料的对脊重叠鳍线的传输特性,重点讨论了金属鳍的厚度对其特性的影响,同时研究了材料对主模截止波长、单模带宽、主模和第一高阶模场结构及色散特性的影响。结果表明,加载左手材料时,主模截止波长几乎都比加载右手材料时小,主模截止波长和单模带宽随加载区域的扩大呈相反的变化趋势,主模场线和第一高阶模场线在加载区域的分布形状完全相反,色散特性相似。这些数值计算结果有助于新型微波和毫米波器件的设计。
The vacuum-sealed miniature modulated x-ray source (VMMXS) with a hot cathode is fabricated via the single-step brazing process in a vacuum furnace. An experiment following the VMMXS is implemented to present its performances, including the influence of g
In order to achieve the accurate measurement of displacement, this Letter presents a self-mixing interference displacement measurement method suitable for the speckle effect. Because of the speckle effect, the amplitude of the self-mixing interference sig
A new approach is proposed to extract the rectangular building footprints from single high-resolution synthetic aperture radar (SAR) image by combining region-based information with edge-based information. We build multiscale autoregressive (MAR) model an
在激光腔型设计时, 为了使激光具有良好的输出性能, 需要找出谐振腔参量对激光输出性能的影响规律。结合V型折叠腔的图解分析法和多元件光学谐振腔的等价腔分析法, 将折叠腔近似等价后, 对等价的共轴球面空腔的稳定性和输出光束质量进行理论求解分析, 找到了V型折叠腔参量和激光输出性能的内在联系。通过计算给定的条件可知, 当折叠角θ=0.15π时, 总腔长L的理想取值范围为(70, 80)mm, 最佳取值为75 mm, 端面镜曲率半径R1、R2的允许变化范围为(60, 75)mm, 折叠镜曲率半径R3的最小取值为4
描述了利用低相干干涉技术实现光学镜面间距测量的方法。首先，采用微机电系统(MEMS)光开关多通道延迟结构实现测量范围的多倍增，然后通过共光路激光测距结构实现扫描反射镜的位移测量，再利用包络提取算法对低相干干涉信号的零光程差位置进行定位，最后实现镜面间距的高精度测量。实验测量系统为全光纤结构，利用该系统完成了对因瓦合金（Invar）标准块、大间距光学结构和光学镜组的镜面间距测量，在导轨扫描量程为300 mm的条件下，实现了在0.02~550 mm范围内的镜面间距测量，测量精度优于0.5 μm。该套系统可用于