S波段6 MeV驻波加速器主要用于钢铁工件的无损探伤照像,特别适用于重机、化工、压力容器的质量检验。本系统采用分布式网络控制,分三级进行监测和控制,前端设备通过网络通讯方式联成控制网络,分别对各子系统进行采集、测量、控制、保护,用软件代替部分硬件,实现很多新功能,且易于测试、生产、维修和维护升级。 S-band 6 MeV standing wave accelerator is mainly used for non-destructive inspection of steel parts, especially for heavy machinery, chemical, pressure vessel quality inspection. The system uses distributed network control, monitoring and control in three levels, the front-end equipment through the network communication way into the control network, respectively, the acquisition of subsystems, measurement, control, protection, software to replace some of the hardware to achieve a lot of new Function, and easy to test, production, maintenance and maintenance upgrades.