一、超声波抛光的原理和设备长期从事模具抛光工作的人会想到,如设法得到一种手段,将研磨用工具安装在工具杆上,作高频纵向的振动,就可解决手工操作。因此,选择超声波作为振动源是最为合适的。一方面,电气超声频振动可以转换成工具头的机械振动,传导方式是纵向振动,因而使磨削工具在型面作一顺方向的磨削动作。另外,通过合理的设计从超声发生器到工具头之间的传输连接方式,工具头可以制成手持式的,这样的超声设备,可以适应各种模具的不规则型 First, the principle and equipment of ultrasonic polishing Long-term engaged in mold polishing work will come to mind, such as trying to get a means of grinding tools installed on the tool pole for high-frequency longitudinal vibration, you can solve the manual operation. Therefore, the choice of ultrasonic vibration source is the most appropriate. On the one hand, the electrical ultrasonic vibration can be converted into the mechanical vibration of the tool head. The conduction mode is vertical vibration, so that the grinding tool can make a smooth grinding action in the direction of the surface. In addition, by reasonably designing the transmission connection from the ultrasonic generator to the tool head, the tool head can be made into a hand-held ultrasonic device which can adapt to the irregularities of various molds