论文部分内容阅读
扁管、板式散热器的安装通常是采用托卡加膨胀螺栓固定安装。一般每组散热器使用4个托卡,8个φ8的膨胀螺栓。安装时在墙上打8个孔,散热器尺寸小的可打4个孔。栽上膨胀螺栓,拧紧螺丝,固定好托卡,再将散热器挂上。这种传统的安装方法既不经济又不方便,而且膨胀螺栓容易松动,固定不牢,散热器容易晃动。遇上加气块墙、保温墙,使用膨胀螺栓则无法安装。现介绍一种简易、快捷、经济、牢固、高效和适应面广的安装方法。
The installation of flat tubes and plate radiators is usually carried out using Tokaja expansion bolts. In general, each group of radiators uses 4 tokas and 8 φ8 expansion bolts. Eight holes are drilled on the wall during installation, and four holes can be drilled with a small heat sink. Install expansion bolts, tighten screws, fix the card and hang the radiator. This conventional installation method is neither economical nor convenient, and the expansion bolts are easy to loosen, the fixing is not firm, and the radiator is easy to shake. In case of aerated block wall and heat preservation wall, the use of expansion bolts cannot be installed. A simple, quick, economical, robust, efficient and versatile installation method is introduced.