【摘 要】
：
The time-delay signature (TDS) of chaos output in a 1550 nm vertical-cavity surface-emitting laser (VCSEL) subject to fiber Bragg grating (FBG) feedback is investigated experimentally. Autocorrelation function (ACF) and mutual information (MI) are used fo
【机 构】
：
SchoolofPhysicalScienceandTechnology,SouthwestUniversity,Chongqing400715,Chinae-mail:zmwu@swu.edu.cn
【出 处】
：
PhotonicsResearch
论文部分内容阅读
The time-delay signature (TDS) of chaos output in a 1550 nm vertical-cavity surface-emitting laser (VCSEL) subject to fiber Bragg grating (FBG) feedback is investigated experimentally. Autocorrelation function (ACF) and mutual information (MI) are used for quantitatively identifying the TDS of chaos. For various bias currents, the TDS evolution with the feedback strength is different, as the FBG provides wavelength-selective feedback. Furthermore, based on the TDS map of the FBG feedback VCSEL (FBGF-VCSEL) in the parameter space of feedback strength and bias current, the optimal TDS suppression regions, where the dominant polarization mode of FBGF-VCSEL locates at the edge of the main lobe of FBG reflection spectrum, have been determined. Finally, for comparative purpose, the TDS of chaos in mirror feedback VCSEL (MF-VCSEL) also has been presented, and the results show that an FBGF-VCSEL possesses better TDS suppression performance than an MF-VCSEL.(XDJK2016D060).
其他文献
本文利用计算机模拟方法,模拟CPM染料激光器中高阶孤子的形成过程,获得了λ=610nm的一、二、三阶稳定的孤子数值解,高阶孤子脉宽为70fs,孤子周期相当于一个光脉冲在腔内往返200次。
改变外色散腔半导体激光器的温度、电流和腔长,可实现复盖调谐范围内的连续调谐和准确调谐.本文叙述连续调谐和准确调谐的原理与实验结果.
Strong nonlinear, electro-optical, and thermo-optical properties of lithium niobate (LN) have gained much attention. However, the implementation of LiNbO3 in real devices is not a trivial task due to difficulties in manufacturing and handling thin-film LN
发散角为4.7×10-3弧度,残余多谱勒宽度7兆赫的原子束与线宽6兆赫的可调谐染料激光正交,激光频率在30千兆赫范围扫描,测得6Li和7Li的22P能级的精细结构分裂分别为9.7±0.4和10.5±0.5千兆赫,22P1/2能级的同位素位移为10.7±0.6千兆赫。激光频率作2.5千兆赫扫描,测得7Li的22P1/2←22S1/2跃迁的四条超精细结构谱线的间距依次为88±11、730±73和92±7兆赫,当光强为4毫瓦/厘米2时,记录的谱线宽度为22兆赫。对影响谱线宽度、相对强度及测量精度的一些因素也进行
在不同焊接参数下对QP1180高强钢薄板进行激光焊接试验,对接头的显微组织、显微硬度、拉伸性能及杯突成形性能进行了分析。研究结果表明:在热影响区的回火区(软化区)形成了回火马氏体组织,导致该区存在明显的软化;提高焊接速度和降低热输入可显著降低软化程度;软化区受到两侧强体的约束而得以强化,导致拉伸后最终断裂在母材处,强度与母材相当;提高焊接速度和增加焊缝偏移可显著提高杯突值,高焊接速度下的焊板垂直于焊缝开裂,具有高杯突值,低焊接速度下的焊板沿软化区平行于焊缝开裂,具有低的杯突值;随着焊缝偏移的增大,杯突值增
Photoacoustic imaging and microwave-thermoacoustic imaging are innovative hybrid imaging techniques that have experienced rapid development in recent years. Photoacoustic imaging is based on the photoacoustic effect. When the laser pulses (the width of th
Real-time and high-resolution imaging is demonstrated based on field trial detection of a non-cooperative target using a photonics-based inverse synthetic aperture radar (ISAR). By photonic generation and de-chirping of broadband linear frequency modulati
本文详细分析研究了LNP的光谱特性,首次给出了Nd~(3 )离子在LNP中的4个荧光带及偏振谱,并且测量了荧光寿命。
Experiments on developing a frequency-stabilized 555.8-nm laser are presented. The 555.8-nm laser is obtained by frequency doubling of a 1111.6-nm diode laser through single-passing a periodically poled lithium niobate (PPLN) waveguide. The 555.8-nm laser
在离轴数字全息的应用研究中，将数字全息图视为单位振幅平面波照射下的光波场，利用1次快速傅里叶变换(FFT)计算菲涅耳衍射积分是最流行的物光波前重建方法(简称1-FFT法)。然而，用球面波为重建波，利用像平面滤波技术及角谱衍射理论，存在需要4次FFT的另一种波前重建方法(简称FIMG4FFT法)。基于快速傅里叶变换理论对这两种方法进行研究。结果表明，尽管FIMG4FFT重建方法需要进行4次FFT计算，却能用较少的计算资源高效率地重建同等质量的物光场。为便于实际应用，详细给出FIMG4FFT方法在彩色数字全息