筒仓结构通常采用滑模施工,而滑模工艺属于特殊工艺,在施工中要求较高,施工过程中的不确定因素很多,易出现问题。目前,针对筒仓结构加固有多种方法,如外粘钢板法、预应力钢绞线加固法和粘碳纤维加固法等,但是这些加固方法都是在筒仓结构外壁进行加固,不考虑对库内壁的破坏程度和影响。在继续使用一段时间后会出现更为严重的破坏问题。针对这种情况,为了在筒仓出现破坏后分析根本原因,需对库内清仓处理,根据库内壁的破坏程度制订加固方 The structure of the silo usually adopts sliding mode construction, while the sliding mode process belongs to a special process, which requires high requirements in the construction. There are many uncertainties in the construction process and problems are easy to occur. At present, there are various methods for reinforcing the silo structure, such as the external sticking plate method, the prestressing strand reinforcement method and the carbon fiber reinforced method, etc. However, these reinforcing methods are all reinforced on the outer wall of the silo structure, The destruction of the inner wall and the impact. After continued to use for some time there will be more serious damage problems. In response to this situation, in order to analyze the root causes of the damage in the silo, the need to warehouse clearance processing, according to the extent of damage to the wall to develop reinforcement