Property of the azimuthal orientation angles turning by the same axis of the system

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:skyfox
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
We focus on the need for azimuthal orientation angles of a system. If one azimuthal orientation angle is a function of other angles and these angles turn independently by the same axis, the sum of the partial differential of the function to the other angles is 1. We use this property of the azimuthal orientation angles turning by the same axis of the system to analyze the experimental phenomena of the terahertz polarization, and then quantum theory is used to explain the experimental phenomena.
其他文献
For a dynamic routing and wavelength assignment (RWA) a star topology is shown to be more efficient in comparison with a ring topology. Analytical formulas for a dynamic RWA in a star network are presented and verified with virtual simulation.
A continuous-wave Nd:YVO4/BaWO4 Raman laser generating simultaneous multi-wavelength first-Stokes and second-Stokes emissions is demonstrated for the first time, to the best of our knowledge. Investigations concerning different pump
针对目前光纤温度传感器稳定性及抗干扰性差的问题,研究设计了一种新型光纤温度传感器探头。光纤温度传感薄膜探头是以锗为传感薄膜材料,探头结构采用了双层膜层叠结构,其中低折射率材料是二氧化硅,高折射率材料为锗。其探测原理是根据锗的折射率随温度变化而改变,从而导致了反射率的变化,在实际应用中,通过测量反射功率值达到测温的目的。光纤温度传感薄膜探头具有良好的线性特性,通过实验验证可以得到在测温范围为30 ℃~130 ℃时,其线性为99.85%。结果表明,得出的结论能够满足光纤温度传感器的线性化的目的。
A sealed-off CuBr vapour laser with the maximal average output laser power of 20 W was fabricated and investigated. The corresponding efficiency is 1.2% and the specific average output laser power is 123 mW/cm3 in an active volume of 163 cm3. The lifetime
期刊
The rational design of the sample cell may improve the sensitivity of surface-enhanced Raman scattering (SERS) detection in a high degree. Finite difference time domain (FDTD) simulations of the configuration of Ag film-Ag particles illuminated by plane w
激射光学公司(Maser Optics Inc. Boston)说,脉冲红宝石光激射器现在正用来从薄膜电阻器上蒸发金属,所获的精度为1/2000。该公司为这项工作的硏制者。公司说,这种装置在德文公司(Daven Company, Ν. J.)的应用标志着光激射器首次被用作“实用的生产工具”。
期刊

采用多片探测器拼接是实现长线阵焦平面的通用方法。反射式光学拼接是焦平面常见的拼接方式之一。对于光学拼接,拼接反射镜几何参数设计不合理会导致定焦平面出现漏缝、杂光、遮挡光路等成像缺陷。反射镜参数计算是光学拼接焦平面设计的核心内容之一。详细介绍了光学拼接焦平面拼接反射镜的参数计算。根据几何光学建立光学拼接成像模型,分别对奇数片探测器和偶数片探测器的拼接反射镜的几何参数进行公式推导,主要包括拼接反射镜的位置、长度、宽度、角度等几何参数的数学表达式。最后将算法公式应用于工程实例,对像方远心和非远心两种典型的

阐述了由单张干涉图求取相位主值图像及最小二乘相位恢复。 推导出基于梯度拟合的泊松方程及其离散化形成后, 详细讨论了多重网格法对此方程求解的原理和过程。 结合路径无关与路径相关算法的优点, 设计了自适应最优路径法作为多重网格法的预处理, 改进迭代的初始条件, 提高了重建精度, 同时大大加快了收敛速度。 实验结果证明改进的多重网格法对含遮挡物的干涉图能获得很好的波前重建效果。
空军正在设法研制一种保证“基本上具有无限寿命”的光学数据存盘材料。该计划将由空军电子系统分部发起,它包括在碲或其他录象盘介质上用离子束等离子体淀积碳膜的研究工作,以期改进 录象盘的写入能力,并提供“总稳定性”。
期刊