关于热力管线导向管托的安装位置 ,一般的设计参考资料都只是说明需在Π形补偿器的两侧或每隔一定距离的直管段上安装导向管托 (如图 1所示Ｄ1 ,Ｄ2 ,Ｄ3,Ｄ4) ,而未提及在垂直安装的Π形补偿器横臂上加导向管托 (如图 1所示Ｄ5 ,Ｄ6 )。笔者根据实践经验认为 ,在较长且无转向 For the installation position of the heat pipe guide tube, the general design reference only states that the guide pipe support needs to be installed on the straight pipe sections on both sides of the Π-shaped compensator or at certain intervals (as shown in Figure 1 D1, D2, D3, D4), without mentioning that a guide tube holder (D5, D6 as shown in FIG. 1) is added to the vertically-mounted Π-shaped compensator arm. According to the author’s practical experience that, in the longer and no turn