论文部分内容阅读
提出并从实验上实现了利用光学腔产生单环状拉盖尔-高斯模的方法。给出了方案的理论描述及实验操作技巧。通过与平面波的干涉条纹验证了螺旋状的波前相位分布。
利用光学腔产生单环状拉盖尔-高斯模
【摘 要】
：
提出并从实验上实现了利用光学腔产生单环状拉盖尔-高斯模的方法。给出了方案的理论描述及实验操作技巧。通过与平面波的干涉条纹验证了螺旋状的波前相位分布。
【机 构】
：
量子光学与光量子器件国家重点实验室,山西大学物理电子工程学院,山西太原030006
【出 处】
：
量子光学学报
【发表日期】
：
2012年18期
其他文献
Achieving ignition of ICF (inertial confinement fusion) has been the great dream that scientists all over the world pursue. As a grand challenge, this aim requires energetic and high quality lasers. High power laser facilities, for this purpose, have t
期刊
In order to reduce the error caused by the change of temperature, the relation between three-in-one composite compensator's phase retardation and temperature is calculated according to the characteristic of multiple-order quartz wave-plate. The results s
Three-dimensional reconstruction for a large scene of integral imaging based on color-position chara
A new large-scale three-dimensional (3D) reconstruction technology based on integral imaging with color-position characteristics is presented. The color of the object point is similar to those of corresponding points. The corresponding point coordinates f
期刊
A stable self-starting mode-locked Nd:YVO4 laser with a Herriott-type multiple-pass cavity (MPC) operating at 1 064 nm is demonstrated. An in-band 880-nm laser diode is used as an end-pump and a semiconductor saturable absorber mirror (SESAM) is used for
提出了一种新的基于非周期高折射率差亚波长光栅(HCG)的光功分器(OPS)。该光功分器在实现光功率均分的同时保持高反射率。为实现上述功分器，通过严格耦合波理论分析(RCWA)周期性亚波长光栅在不同的周期和占空比下的反射率和相位分布，从而挑选合理的参数用于设计非周期亚波长光栅以获得特定的反射相移。最后借助于有限元法(FEM)进行数值分析，经计算光功分器的插入损耗为3.27 dB,波长变化范围为1.50~1.60 μm，且很容易与半导体器件集成。
本文用Stern-Volmer作图法,在泵浦功率密度为每立方厘米数兆瓦的条件下,求得X光预电离脉冲雪崩放电中XeCl的形成效率和电子去激发速度分别为12.4％和1.16×10~(-7)cm~3/sec。
期刊
Experimental method for the extraction of intensity profiles by imaging the scattered pattern with a
A practicable experimental method for measuring scattering on rough surfaces is reported. The scattered patterns are captured on a screen composed of two pieces of ground glass and then imaged using a charge-coupled device. The scattered intensity profile
针对惯性约束聚变(ICF)驱动器对谐波分离的苛刻要求,利用基于矢量衍射理论开发的商用软件Gsolver,在布拉格(Bragg)入射角下,设计满足分光要求的光栅参数,并根据对影响谐波分离性能的亚波长光栅的各个参数进行了分析,研究了实现谐波分离的亚波长光栅的优化设计方法,并设计得到了满足谐波分离要求的亚波长光栅。研究结果为亚波长光栅用于谐波分离提供了理论支持。