【摘 要】
：
This paper focused on the folding damage behavior of the space rigidizable materials in terms of 3-layer composite membranes. An experimental scheme was present
【机 构】
：
Center for Composite Materials,Analysis and Measurement Center
论文部分内容阅读
This paper focused on the folding damage behavior of the space rigidizable materials in terms of 3-layer composite membranes. An experimental scheme was presented. The composite membranes were folded between the two plates for a short time, and then the unfolded composite membranes were compressively cured in an oven. By adjusting the displacement of one plate, the folding radius was changed. As expected, the strength and effective modulus of the cured composite membranes drop with decreasing the folding radius. When the strain controlled failure rule is applied to the composite membranes, a minimal folding radius can be reached, beyond which the membranes will keep intact.Furthermore, folding damage due to folding and unfolding processes was evaluated by a simplified model. Compared with the measured residual strength and effective modulus, calculated results have the same trend. A discrepancy is attributed to neglecting the effects of the transverse fibers and the matrix.
其他文献
NiO buffer layers were formed on a tape of Ni for making YBCO coated conductor by surface-oxidation epitaxy (SOE) process. Different oxidizing conditions such a
Nanocrystalline tungsten carbide thin films were fabricated on graphite substrates by plasma enhanced chemical vapor deposition (PECVD) at H2 and Ar atmosphere,
The effect of size and distribution of titanium carbide on the microstructure and mechanical properties of non-burning β titanium alloy Ti-25V-15Cr-2Al-0.2C-0.
In this work, a thermodynamic model is developed for prediction of structure H hydrate formation. The model combines the Peng-Robinson equation of state for the
The solder joint reliability of a 0. 5 mm lead pitch, 240-pin quad flat package(QFP) was studied by nonlinear finite element analysis(FEA). The stress/strain di
Nanosized orthorhombic LiMnO2 was successfully synthesized using Mn2O3 and LiOH.H2O as starting materials.Not only the reaction temperature was lower, but the r
Indium tin oxide ( ITO ) thin films ( 100 ± 10 nm) were deposited on PC ( polycarbonate ) and glass substrates by rf( radio-frequency ) magnetron sputtering. T
The internal frictions of the specimens in the waist centre of the commercial BNb and BNbRE rails, which were left in air for two years, were measured. It is fo
2007年夏季对青岛沿海石莼科绿藻,包括定生石莼Ulva、定生浒苔Enteromorpha以及漂浮浒苔Enteromorpha进行了样本采集,针对其17种金属元素和3种非金属元素进行了含量分析与比
The luminescent nanosized Eu-MCM (1:10) was synthesized by means of sol-gel-assisted self-assembly under basic conditions at room temperature. The results of 29