日本横滨国立大学工程学部中山研究室创造了一种在切削加工中,能够测量磨耗量的新方法。这种方法是给车刀加一个冲击力,根据车刀返回的振动大小来推断其磨耗量。靠这种方法可测磨耗量约为0.6mm,而且装置既简单又好,测定误差在±10%以内,并具有高精度。 具体的测定方法如下图所 Yokohama National University Engineering Department of Zhongshan Research Laboratory created a cutting in the new method of measuring the amount of wear. This method is to add an impact on the turning tool, according to the size of the vibration returned by the turning tool to infer the amount of wear. Measurable by this method is about 0.6mm wear, and the device is simple and good, the determination of error within ± 10%, and with high accuracy. The specific measurement method as shown below