【摘 要】
：
A kind of self-made AgCuTiSn braze alloy powder was used to join graphite and copper. The whole brazing process was performed under vacuum circumstances at diff
论文部分内容阅读
A kind of self-made AgCuTiSn braze alloy powder was used to join graphite and copper. The whole brazing process was performed under vacuum circumstances at different temperatures (1033-1193 K) for several holding time (300-1800 s). According to scanning electron microscope (SEM), energy dispersive spectrometer (EDS) and electron probe X-ray microanalysis (EPMA) results, the reaction products of the interface are TiC, Ti3Sn, Cu(s. s), Ag(s. s) and Cu-Sn compound. As the brazing parameters increase, the quantity of Ag(s. s) in the braze alloy and C fibers on graphite/AgCuTiSn interface reduce, while that of Cu (s. s) in the braze alloy improves. When the brazing temperature is 1093 K and holding time is 900 s, the joint can obtain the maximum room temperature shear strength 24 MPa.
其他文献
目前我国有众多省际边界城市,其总体规划的编制既涉及到跨省际的区域协调,也关系到城市内部功能布局.以石首城市总体规划的实践为例,以编制思路的突破、规划重点的突出和组织
The imaging problem of low signal to noise ratio (SNR) echo is very important for ultra-wide band (UWB) through-wall radar.An improved multi-channel blind image
分析目前中药研究存在的问题及中药归经研究的现状,提出中药现代化即以中医药理论为指导,用现代科学方法来研究中药,将传统中医药的优势、特色与现代科技相结合.中药归经理论
Target tracking is one of the most important applications of wireless sensor networks. Optimized computation and energy dissipation are critical requirements to
Reliability-based design is one of major strategies for cost-effective designs under uncertainties in either engineering designs or manufacturing processes.This
In order to investigate the rules on formation of zeolite during crystallization of titanium silicalite zeolite (TS-1) the X-ray diffractometry and Foulier tran
High quality strain-relaxed thin SiGe virtual substrates have been achieved by combining the misfit strain technique and the point defect technique.The point de
The intemational standard ISO 10303.called STEP.has been used to deal with problems in the ex change of product models and the associated data between difierent
94mTc was produced via natMo(p,xn)94mTc reaction.Deposition of MoO3 on Cu substrate was carried out via two special sedimentation methods for the production of
Three kinds of Al-Si piston alloys were prepared and subjected to pulse electric current treatment (PECT) at different pouring temperatures. Some aspects of the