【摘 要】
:
The effects of rare earths with different contents on anti-degradation of Y base heavy rare earths-magnesium and cerium base light rare earths-magnesium nodular
【机 构】
:
School of Materials Science and Engineering,School of Mechanical & Electrical Engineering
论文部分内容阅读
The effects of rare earths with different contents on anti-degradation of Y base heavy rare earths-magnesium and cerium base light rare earths-magnesium nodular cast iron were studied. Curves of the relationship between the spheroidization grade of liguid iron treated by different nodulizers and holding time were obtained. The results show that the more the remains of the rare earth, the longer the anti-degradation time, the liquid iron was treated either by Y-Mg-Si or by Ce-Mg-Si nodulizer. When the rare earth remains are above certain quantity, the spheroidization grade starts to decline. When liquid iron treated by either Y-Mg-Si or Ce-Mg-Si nodulizer with proper remains of rare earths about 0.04%~0.06%(mass fraction), the anti-degradation is the best, and the remains of Mg being about 0.04%~0.07%(mass fraction). Rare earths-Mg nodulizer with moderate RE remains is better than that of Mg-Si nodulizer in anti-degradation property. However, Y-Mg-Si nodulizer with moderate remins of Re is better than Ce-Mg-Si nodulizer. Sometimes Ce-Mg-Si nodulizer can be used for the production of heavy section nodular cast iron.
其他文献
The lead-free piezoelectric ceramics (1-x)(K0.5Na0.5)NbO3-xLiNbO3(abbreviated as KNLN) were synthesized by a traditional solid state reaction. The effects of Li
Simulations of heat transfer and oxygen transport during a Czochralski growth of silicon with and without a cusp magnetic field were carried out. A finite volum
In this paper we describe how progressive download and adaptive streaming can be combined into a simple and efficient streaming framework. Based on the MPEG-4 f
Non-equilibrium morphology has received much attention from both scientific and engineering points of view for its intricate pattern selection mechanisms and us
Three kinds of Ni and Al powder mixtures with nominal composition Ni75Al25 were employed to prepare Ni3Al alloys by spark plasma sintering(SPS) process. The raw
The solidification microstructures and the mechanism of grain refinement of electrolytic low titanium Al alloys were investigated by means of the wedge-shaped s
Hydration heat evolution, non-evaporative water, setting time and SEM tests were performed to investigate the effect of fine steel slag powder on the hydration
In the condition of 20 ℃, 5% sulfate liquor curing, standard tap water curing and 50% RH curing-three different curing environments, the volume change of steel
Red phosphor (Y, Gd)BO3:Eu3+ with grain shape, small size, non-agglomerate, high crystallinity and good photoluminescence (PL) intensity was prepared by a compl
Steel corrosion is the main occasion for durability degradation of concrete structures. For existing corrosion-expansion models of reinforcement, effects of sti