在刨床上加工零件,通常需要走刀一次测量一次,这样停车、开车浪费很多时间。如果是成批生产,还不能很好地保证加工零件的质量。针对上述问题,我们想出了一个办法,即在刨床的床头滑板和横梁上,分别安装高度和宽度行程定位器,克服了上述缺点,实现了优质高产。行程定位器的作用是:当被加工零件做到尺寸后,就把刀具停止在终点位置上,使它不继续前进,因而免去了加工过程中的测量工作,同时还能保 Machining parts in the planer, usually take a knife to measure once, so parking, driving waste a lot of time. If it is mass-produced, it still can not well guarantee the quality of the processed parts. In response to the above problems, we have come up with a solution to the height and width of the planer headboard skids and beams installed separately, to overcome the above shortcomings, to achieve high quality and yield. The function of the travel positioner is to stop the tool at the end position after it is dimensioned so that it does not go forward, thus eliminating the need for measurement during machining and at the same time