目前大多的水厂对饮用水都使用传统的消毒方法,即在清水池前投加氯气,靠水流的作用,通过较长的接触时间及反应来完成,由于速度慢、时间长,会产生降能作用。如果采用快速消毒方法,则可以充分利用有效态的氯量,以较小的投量和较短的接触时间来达到消毒目的。 At present, most of the water plants use traditional disinfection methods for drinking water. That is, chlorine is added before clear water tanks. It is completed by long contact time and reaction due to the effect of water flow. Due to the slow speed and long time, it will produce drop. Can function. If a rapid disinfection method is used, the amount of available chlorine can be fully utilized to achieve the purpose of disinfection with a smaller dosage and a shorter contact time.