论文部分内容阅读
5.3 采用机械加工方法加工的两配合件的结合面,应用涂色法检验接触情况,检验方法按JB/T 9876的规定。接触应均匀,接触指标不得低于表3的规定。5.4 重要固定结合面和特别重要固定结合面应紧密贴合。5.4.1 重要固定结合面在紧固后用表4规定的塞尺检验时不得插入。5.4.2 特别重要固定结合面除用涂色法检验外,紧固前、后用
5.3 Machined with the processing of the mating parts with the mating surface, the application of color test contact conditions, test methods according to JB / T 9876’s. Contact should be uniform, contact indicators shall not be less than the provisions of Table 3. 5.4 Important The fixed joints and the particularly important fixed joints should be closely fitted. 5.4.1 Important Fixed joints shall not be inserted during the feeler test specified in Table 4 after tightening. 5.4.2 Particularly important In addition to the fixed surface with color test, the fastening before and after use