论文部分内容阅读
最近,我将一台电脑升级,微机主板由Intel板皇换为华硕P55T2P4,显示卡由S3(64V+)换为丽台280,CPU为Pentium 133不变。按理说微机的综合性能应该有一定程度的改善,但使用该机器结合XingMPEG(Version 1.40)软解压播放VCD,发现其图像播放质量明显逊色于以前。而我只更换了主板和显示卡,其余配置都没有改变,询问板卡供货商原因,他们也说这个问题常出现,但没有解决办法。我仔细翻阅了丽台280显示卡的手册,经反复试验,终于找到了症结所在。 在使用丽台280随卡所带光盘设置Windows显示驱动程序后,会产生Winfast S280 Utilities程序组,进入该程序组的Leadtek Winfast 280 Setup程序项的
Recently, I upgraded a computer with an Intel motherboard and an ASUS P55T2P4 motherboard. The display card was changed from S3 (64V +) to Leadtek 280 and the CPU was Pentium 133 unchanged. It stands to reason that the overall performance of the computer should have a certain degree of improvement, but the use of the machine with XingMPEG (Version 1.40) soft decompression play VCD and found that its image playback quality significantly inferior to the previous. I just replaced the motherboard and graphics card, the rest of the configuration has not changed, asked the card supplier reasons, they also said that this problem often appears, but there is no solution. I carefully read the handbook of the DisplayStation 280 card, after repeated tests, finally found the crux of the problem. After setting up the Windows Display Driver on your CD with the Belt 280, a Winfast S280 Utilities program group will be created, entering the Leadtek Winfast 280 Setup program entry for that program group