【摘 要】
：
Submicron diamonds were co-deposited on aluminum substrates with copper from the acid copper sulfate electrolyte by electrolyte-suspension co-deposition.After s
【机 构】
：
The key Laboratory of the Ministry of Education of China for Aerospace Materials and Performance,Sch
论文部分内容阅读
Submicron diamonds were co-deposited on aluminum substrates with copper from the acid copper sulfate electrolyte by electrolyte-suspension co-deposition.After submicron diamonds were added to the electrolyte,the shape of copper grains transformed from oval or round to polyhedron,the growth mode of copper grains transformed from columnar growth to gradual change in size,and the preferred orientation of copper grains transformed from (220) to (200).Analyzing the variation of cathodic overpotential,it was found that the cathodic overpotential tended to remain unchanged when copper plane (220) grew in the process of electrodepositing pure copper,while it tended to decrease with time when copper plane (200) grew m the process of co-deposition.It was inferred that copper plane (200) was propitious to the deposition of submicron diamonds.
其他文献
The quality of the micro-mechanical machining outcome depends significantly on the tracking performance of the miniaturized linear motor drive precision stage.T
The Co-Cr-Ni ternary system was critically assessed using the CALPHAD technique.The solution phases including the liquid,γ(Co,Ni),εCo and αCr phases were des
For acquiring the details in aluminum holding furnace with bottom porous brick purging system,efforts were performed to try to find out the potential optimal op
The lattice-reduction (LR) has been developed to improve the performance of the zero-forcing (ZF) precoder in multiple input multiple output (MIMO) systems.Und
Ship-mounted container cranes are challenging industrial applications of nonlinear pendulum-like systems with oscillating disturbance which can cause them unsta
在费率厘定中,当索赔次数数据存在过离散(over-dispersion)特征时,通常会采用负二项回归模型,但当索赔数据中同时又出现零膨胀(zero-inflated)问题时,负二项回归模型不再适合
Isothermal compression of the Ti-6Al-4V alloy at the deformation temperatures of 950 and 980℃,height reductions of 30％ and 60％,and strain rates of 0.001,0.010,0.
在实际顶点覆盖选址过程中，经常会遇到如下的情形：在需要服务的边的个数未知的前提下，决策者需要决定在哪里建立初始的设施（或设施集），同时还要求，当新的设施建立后，前面已经建立的设
The electrochemical migration (ECM) behavior of the electrically conductive adhesives (ECAs) filled with pure Ag powder or Ag-plated Cu composite powder with va
The delayed-state-derivative feedback (DSDF) is introduced into the existing consensus protocol to simultaneously improve the robustness to communication delay