论文部分内容阅读
Micro-diamond films were prepared on YG6 substrate by hot filament chemical vapor deposition method.An innovative micro-diamond coated tool was used to the lap sapphire wafer.The effect of load,rotating speed,and lapping time on material removal rate(MRR)and surface roughness was investigated.The results showed that the best process parameters were 3N,100r/min and 15 min.The surface quality of sapphire improved significantly after lapping.The coating after lapping adhered well and did not show any peeling.The innovative micro-diamond coated tool was feasible and suitable for the lapping of the single crystal sapphire wafer.
Micro-diamond films were prepared on YG6 substrate. The method of micro-diamond coated tool was used to the lap sapphire wafer. The effect of load, rotating speed, and lapping time on material removal rate (MRR) and surface roughness was investigated. The results showed that the best process parameters were 3N, 100 r / min and 15 min. The surface quality of sapphire improved significantly after lapping. The coating after lapping adhered well and did not show any peeling.The innovative micro -diamond coated tool was feasible and suitable for the lapping of the single crystal sapphire wafer.