论文部分内容阅读
对横流电激励连续CO2激光器正支共焦非稳腔的环形输出光束,进行了近场和远场光斑图样和强度分布理论计算及实验测量,两者基本一致.
正支共焦非稳腔输出光束质量的研究
【摘 要】
：
对横流电激励连续CO2激光器正支共焦非稳腔的环形输出光束,进行了近场和远场光斑图样和强度分布理论计算及实验测量,两者基本一致.
【机 构】
：
华中工学院激光研究所
【出 处】
：
中国激光
【发表日期】
：
1985年12期
其他文献
本文采用3～5kW(低阶模3～4kW)高功率CO_2激光束对18CrMnTi低合金钢进行了深穿透焊接的研究,焊缝深宽比接近2,焊接穿透深度达到5.5mm以上,对影响激光深穿透焊接效果的各种焊接工艺参数进行了研究。找到克服激光焊缝区缺陷的一些有效措施。
We propose the use of a power pulse shape of the widely known optical soliton, corresponding to the hyperbolic secant square function, for both conventional atmospheric optical communication systems and, especially, for new full-optical wireless communica
Directly accessing octave-spanning dissipative Kerr soliton frequency combs in an AlN microresonator
Self-referenced dissipative Kerr solitons (DKSs) based on optical microresonators offer prominent characteristics allowing for various applications from precision measurement to astronomical spectrometer calibration. To date, direct octave-spanning DKS ge
期刊
Inverse-designed photonic fibers and metasurfaces for nonlinear frequency conversion [Invited]: publ
This publisher’s note corrects the funding section in Photon. Res.6, B822327-9125PRHEIZ10.1364/PRJ.6.000B82(2018).
期刊
A novel super-resolution near-field optical structure (super-RENS) with bismuth (Bi) mask layer is proposed in this paper. Static optical recording tests with and without super-RENS are carried out using a 650-nm semiconductor laser at recording powers of
为了改善光学波导较大的侧壁粗糙度，探究分次氧化工艺相比于单次氧化工艺的优势,运用微机电系统(MEMS)工艺制备了绝缘体上硅环型谐振腔和跑道型谐振腔，并通过单次氧化工艺和二次氧化工艺对其进行优化处理。理论分析并仿真了粗糙度、散射损耗和光学谐振腔传输特性之间的关系。实验结果显示，相同的氧化深度下，相比单次氧化工艺，二次氧化工艺获得了较窄的半峰全宽(FWHM)、较高的品质因数(Q)和较低的传输损耗。研究结果为波导表面光滑研究提供了重要的参考依据，同时对于高Q 值、低损耗谐振腔的制备及其在滤波器、生物传感和光学陀
At present, there are no methods that determine the total microbial load on an abiotic substrate in real time. The utility of such a capability ranges from sterilization and medical diagnostics to the search for new microorganisms in the environment and s