Large Deflection Buckling Spring-Piece (LDBSP) refers to the deformation of an end-fixed flat spring-piece under normal loadings. Plastic deformation usually appears in LDBSP.The static characteristic curve is very particular, because within its linear deflection region, the spring constant can be designed to be any value from minus to plus. With its obvious advantages of large liner deflection range, low spring constant, etc., the LDBSP has now been extensively applied to the exciting device, low-frequency shock absorbers and so on. The static characteristic curve of LDBSP belongs to the nonlinear problem of an arch with varying section. Therefore, it is difficult to obtain it theoretically. The formulae for designing LDBSP have not been set up yet. In this study,the authors apply similarity theory to analyze the liner deflection range A and the spring constant K, and derive the relationship of similarity criterion, finally obtain a set of formulae for designing LDBSP by model test and the least square method, which can be applied in engineering design.Through the research, it is proved that it is unnecessary to keep geometrical similarity of spring-piece shape. This fact extends the application scope of the formulae. The proposed formulae for designing LDBSP thereby can be applied for any dimensions within the range allowed.