【摘 要】
:
The new electrorheological (ER) material, a particle material composed of Y4O(OH)9(NO3) and NH4NO3, was obtained.They display better ER performance.The shear st
【机 构】
:
State Key Laboratory of Rare Earth Materials Chemistry and Applications,Department of Chemistry,Scho
论文部分内容阅读
The new electrorheological (ER) material, a particle material composed of Y4O(OH)9(NO3) and NH4NO3, was obtained.They display better ER performance.The shear stress of the suspension of Y4O(OH)9(NO3)(NH4NO3)2.8 material in dimethyl silicone oil reaches 1469 Pa at an electric field strength (E) of 4.2 kV·mm-1 and the shear rate (γ) of 150 s-1.The relative shear stress, τE/τ0 (τE and τ0 are the shear stresses at E=4.2 and 0 kV·mm-1, respectively), is up to 29, which is 19 times that of pure Y2O3 material.The dielectric and conductive property of the materials play important roles in the modification of the ER effect of the particle materials.The researches on these new ER materials are very useful for obtaining a better understanding on the mechanism of the ER effect and finding an ideal ER material.
其他文献
本文介绍了冀中能源峰峰集团万年矿洗煤厂重介洗煤工艺,阐明了重介质悬浮液回收净化的现实意义,分析了影响重介洗煤厂介耗的因素,为重介质洗煤厂节支降耗提供了一条可供借鉴的新
本文对巴彦淖尔市杭锦后旗实施国家农机购置补贴政策以来,在促进该旗农业发展的基本情况作了简明扼要的说明,并重点针对农机购置补贴政策实施过程中出现的问题、不足以及解决
Fe-2Cu-2Ni-1Mo-0.8C (wt pct) elemental mixed powders were rapidly sintered within 6 min by spark plasma sintering, and the effects of sintering parameters on th
The influence of Co, W and Ti on stress-rupture lives of a Ni-Cr-Al-Mo-Ta-Co-W-Ti single crystal nickel-base superalloy has been investigated using a L9 (34) or
By means of reducing the ratio of water to cement (w/c), incorporating a proper amount of fly ash and superplasticizer, and processing the surface of recycled a
The congestion control mechanisms of the current standard TCP constrain the congestion windows that can be achieved by TCP in high-speed networks, which leads t
Polarimetric optical fibre sensors have been embedded within the 0° ply and close to the 0/90 interface of transparent cross-ply GFRP coupons. The laminate ply
By means of scanning electron microscopy(SEM), energy dispersive spectrum(EDS), X-ray diffractometry(XRD) and metallographic analysis, the effects of variation
This paper addresses the problem of channel estimation for broadband MIMO-OFDM systems. An improved channel estimator with multipath time delay detection and ch
The effect of temperature distribution on warm forming performance was investigated for 5083-O (Al-Mg) sheet metal blanks. Combined isothermal/non-isothermal FE