论文部分内容阅读
Modeling the Synergetic Effect of Various Factors on Chloride Transport in Nonsaturated Concrete
【机 构】
：
Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, College of Civil Eng
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2016年6期
其他文献
Synthesis Mechanism and Material Characterization of C4AF Obtained by the Self-propagating Combustio
To investigate the influence of preparation process on the properties of synthesized C4AF,the powder was prepared via the self-propagating combustion reaction(SPCR)method using urea as fuel and metal nitrates as cation precursors.Synthesis mechanism of th
Comparative Study of Tensile and Charpy Impact Properties of X7O and X8O Linepipe Steels After Ultra
Ultra fast cooling (UFC) processing after hot deformation was conducted on X70 and X80 linepipe steels.Tensile and charpy impact properties of both steels have been investigated in this work.The results have shown that the mechanical properties satisfy al
Cu-Zr-Al- (Y, Ag) amorphous alloy ribbons of Cu50Zr42Al8, Cu46Zr47-xAl7Yx (x=2, 5), Cu43Zr42Al8Ag7, and Cu43Zr42Al8Ag5Y2 were prepared using the single roller melt-spinning method. The glass forming ability and non-isothermal crystallization behavior of t
Microstructure and Electrical Conductivity of CNTs/PMMA Nanocomposite Foams Foaming by Supercritical
The carbon nanotubes (CNTs)/ polymethylmethacrylate (PMMA) nanocomposite foams were prepared by the anti-solvent precipitation and supercritical foaming method. The morphology and the electrical conductivity of the foams with different kinds of CNTs were
Effect of Direct Quenching and Partitioning Treatment on Mechanical Properties of a Hot Rolled Strip
Deposition of Ag Nanoparticles on Carbon Microspheres Surface：Evaluation of Structures, Electrochemi
A hybrid material of carbon microspheres (CMSs) with Ag decoration (Ag/CMSs) was developed. Poly (3-hexylthiophene):Ag/CMSs composite iflm was prepared by spin-coating. Scanning electron microscopy, transmission electron microscopy, Fourier transform infr
High Strength, Ductility and Superplasticity Mg-6Zn-1Y-0.6Ce-0.6Zr Alloy Prepared by Rapid Solidific
High strength,ductility,and superplasticity Mg-6.0％Zn-l.0％Y-0.6％Ce-0.6％Zr (wt％) alloy was prepared by sequentially applying rapid solidification,extrusion,and reciprocating extrusion (REX).The microstructure of the alloy after 2-pass REX consisted of fine
The hydraulic concrete durability under the alternation of freeze-thaw and carbonation has been systematically investigated in this work, where both the micro part and the microscopic characteristics of concrete interface were analyzed based on computed t
Hydration Process and Crack Tendency of Concrete Based on Resistivity and Restrained Shrinkage Crack
Hydration process, crack potential and setting time of concrete grade C30, C40 and C50 were monitored by using a non-contact electrical resistivity apparatus, a novel plastic ring mould and penetration resistance methods, respectively. The results show th