The design of the robot assisted magnetic resonance imaging guidance for minimally invasive surgery

来源 :高技术通讯(英文版) | 被引量 : 0次 | 上传用户:jocelynsusan
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Robot assisted Minimally Invasive Surgery (MIS) is one of the rapidestdeveloping directions in the current surgical realm. Magnetic Resonance Imaging(MRI) is an optimal imaging modality which was applied in MIS in recent years. By combination of precise positioning to the target by intra-operative MRI guided surgery and dexterous motion by the robot, safe and smooth operation is expected to be performed. An overview of the MRI-guided robotic system for MIS is offered. The design of the intra-operative MR scanner system is described. The MR-compatible robotic system is carefully designed for safety and sterilization issues. This system unifies image information from open MRI, an optical endoscope and conventional vital-sign detectors. It helps and guides the surgeon and other medical staffs so they can make the right decisions. The high-performance manipulator can mimic the movement of the urgeon's hand precisely. And the analysis for active and passive interventional surgical instrument tracking is provided.
其他文献
简要地阐述了不同湍流度情况下某翼身组合体模型头部无粗糙带以及粘贴有两侧型粗糙带,40°,60°和70°“只”字型粗糙带等5 种状态的实验结果,并对实验结果进行了分析。实验的湍流度为:0.02%
建立了喷管潜入段二维两相冷流实验设备,进行了相应的实验。实验清晰地显示了在潜入喷管进口背壁凹区旋涡的产生、稳定、消失,以及粒子的冲刷、粘贴、脱落、沉积等反复作用的复
通过单丝临界断裂长度法,研究了聚丙烯(PP)与玻璃纤维(GF)间界面剪切强度(ISS),发现调节酸酐改性聚丙烯(MPP)的加入量,可以相应调整ISS;基体熔体与GF接触时间在8~10min以后界面才能结合完全。当ISS小于4MPa时界面结合过
采用土壤常规测试法和速测仪测试法,对6种典型类型土壤样品的主要属性进行了对比分析测试.统计分析结果表明,两种方法测试土壤硝态氮、有效磷、速效钾和有机质结果间均具有较
对含T27(一种二茂铁衍生物)、卡托辛、Fe2O3三种燃速催化剂的HTPB/AP/Al推进剂在16MPa~22MPa下的燃速和燃速压强指数进行了研究。结果表明:二茂铁衍生物能大幅度提高HTPB/AP/Al推进剂的燃速,同时可使高压下的压强指数大幅
通过对两方程湍流模型的分析,提出了在主流区或远壁区用两方程模型,近壁区用代数湍流模型的思路,即所谓的"双层"模型概念.通过对平板湍流附面层的计算表明,这种分层计算措施
为探究吕家坨井田地质构造格局,根据钻孔勘探资料,采用分形理论和趋势面分析方法,研究了井田7
A model for conceptual design of mechanical devices is studied based on qualitative simulation. In this model, the desired functions are expressed by state-tran
Neutral Beam Injection. (NBI) is an effective way to improve the efficiency of tokamak heating system. This article primarily introduces a work on the pressure
A hardware-software co-simulation method for system on chip (SOC) design is discussed. It is based on an instruction set simulator (ISS) and an event-driven har