【摘 要】
：
A new screen-spot imaging method based on optical measurement is proposed, which is applicable to the close-range measurement of aircraft's three-dimensional (3D) attitude parameters. Laser tracker is used to finish the global calibrations of the high-sp
【机 构】
：
DepartmentofAutomaticMeasurementandControl,HarbinInstituteofTechnology,Harbin150001
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
A new screen-spot imaging method based on optical measurement is proposed, which is applicable to the close-range measurement of aircraft's three-dimensional (3D) attitude parameters. Laser tracker is used to finish the global calibrations of the high-speed cameras and the fixed screens on test site, as well as to establish media-coordinate-frames among various coordinate systems. The laser cooperation object mounted on the aircraft surface projects laser beams on the screens and the high-speed cameras synchronously record the light-spots' position changing with aircraft attitude. The recorded image sequences are used to compute the aircraft attitude parameters. Based on the matrix analysis, the error sources of the measurement accuracy are analyzed, and the maximum relative error of this mathematical model is estimated. The experimental result shows that this method effectively makes the change of aircraft position distinguishable, and the error of this method is no more than 3' while the rotation angles of three axes are within a certain range.
其他文献
根据光传输理论和水体光学衰减规律，提出了水下光源主光轴上光谱辐照度随距离分布的理论模型，确定了模型结构。在此基础上，采用数值计算的方法对模型中各待定参数进行求解，根据模型结构特点提出了对不同参数进行分步拟合的思路并给出了具体的参数求解方法。为了验证建模方法的准确性和可行性，根据水下光源实测数据进行建模并对模型的精度进行了评估。结果显示：模型拟合数据与水下实测数据吻合程度较高，拟合误差的方均根值仅为实测数据方均根值的4%，说明模型拟合精度较高。该方法有望用于水下光场建模、水下图像处理等应用领域。
Silicon carbide (SiC) is a wide bandgap semiconductor which exhibits outstanding mechanical, chemical properties, and potential for a wide range of applications. Laser technology is being established as an -indispensable powerful tool to induce structural
本文报导用于激光等离子体研究的六束亚毫微秒高功率钕玻璃激光系统。每束输出特性如下:输出孔径φ60mm,脉宽(FWHM)100ps,输出能量5～10J,超荧光能量小于1mJ,前脉冲能量为微焦耳量级,束发散角(半极大)为0.5mrad。总输出功率最高为0.6TW。
本文分析了使用有源辅助外腔提高连续波染料激光倍频效率的可能性,分析结果表明,使用这种技术可得到较无源辅助外腔高一个数量级的紫外线能量输出。
根据傅里叶热传导理论和热应力场理论,利用COMSOL仿真软件和Matlab软件构建了复合激光辐照下三结GaAs太阳能电池的复合损伤模型,计算了单毫秒激光和复合脉冲激光辐照下太阳能电池的温度和应力场分布。结果表明,相比单毫秒激光,复合激光辐照会产生更大范围的熔化损伤并且伴随出现明显的应力损伤,损伤面积和深度会随着纳秒脉冲激光能量密度和作用时间延时的增加而增加。能量密度增加到0.5 J/cm 2时,熔化损伤半径增大到2 mm,深度增大到1.5 μm;时间延时增加到0.5 ms时,熔化损伤半径增大到1.4 mm
为了提高基于双目视觉的三维目标检测的精度与鲁棒性,提出了一种基于迭代式自主学习的三维目标检测算法。首先,为了给三维目标检测任务提供更精准的目标点云信息,提出了一种基于迭代式自主学习的视差估计算法,通过迭代地增加目标区域的视差监督信号以及引入选择性优化策略,提高了视差估计在目标区域中的准确性。其次,在网络结构中,提出了一种自适应特征融合机制,将不同模态信息的特征进行自适应融合,进而得到准确且稳定的目
设计制作和测试了用于光波长1.55 μm的40 GHz共面波导(CPW)行波电极的电光调制器。假设聚合物材料的电光系数γ33为30 pm/V，设计的调制器性能参数分别是半波电压Vπ=12.9 V和调制带宽46.46 GHz。用有完全自主知识产权的清华大学化学工程系研制的二阶非线性光学聚合物材料BPAN-NT作为聚合物电光调制器的芯层材料制作了调制器。对调制器的各项特性参数进行了直流、低频和微波的测试，在1.31和1.55 μm波长上测得直流Vπ分别为55.5和83.3 V，折算得芯层材料的电光系数γ33=
We demonstrate a femtosecond mode-locked erbium-doped fiber laser (EDFL) using a nickel oxide (NiO) as a saturable absorber (SA). NiO nanoparticles are hosted into polyethylene oxide film and attached to fiber ferrule in the laser cavity. The NiO-SA shows
A tunable erbium-doped fiber (EDF) laser with a cascaded structure consisting of in-line Mach-Zehnder interferometer (MZI) and traditional MZI is proposed. The transmission spectrum of the in-line MZI is modulated by the traditional MZI, which determines