论文部分内容阅读
潜油电机的制造成本很高,在使用过程中,由于井温高,电机一旦发生故障,就得停机起泵。这样不仅给生产造成一定损失,而且起泵费用也较高。为使潜油电机耐高温,提出一种新的设想,即电机的定子不浸漆;绕组线的绝缘材料用聚醚乙醚酮或醚酮;用这种绝缘材料具有耐水、防油、抗磨、防高温等特点。绕组端部线圈固定在具有同样特点的绝缘支承块上。电机定子绝缘装置的绝缘强度大约为12～16kV/mm,可在205℃高温条件下连续使用。
Submersible motor manufacturing costs are high, in use, due to high temperature, the motor fails, you have to shut down the pump. This not only caused some losses to production, but also from the pump costs are higher. To make the submersible motor high temperature, put forward a new idea, that is, the stator of the motor is not impregnated; polyether ether ketone ether or ether ketone insulation material used in the winding line; with this insulating material has water, oil, abrasion , Anti-heat and so on. Winding end coil is fixed on the same characteristics of the insulating support block. Insulation strength of the motor stator insulation device is about 12 ~ 16kV / mm, 205 ℃ can be used continuously under high temperature conditions.