High-power passively Q-switched ultra-thin slab lasers

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:yuleweiyuan
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Ultra-thin slab with the dimension of 1*10*60 (mm) is demonstrated to acquire high-power laser output with high beam quality. The output average power of 70 W with diffraction limited beam quality is obtained, and the total optical-optical efficiency is about 32%. It can produce more than 100 W output laser when it operates with multi-mode. Cr4 :YAG is adopted as the saturable absorber, the pulse repetition rate is higher than 10 kHz, and the pulse duration is less than 10 ns. An asymmetrical composite crystal is also studied, the new crystal consists of two layers: one is undoped YAG, the other is Nd-doped YAG layer. It is shown that thermal effects of the new asymmetrical crystal are obviously reduced.
其他文献
A high pulse repetition frequency (PRF), high energy Ho:YAG laser directly pumped by a Tm-doped fiber laser and its application to a mid-infrared
设计了由超低膨胀玻璃材料制作的光学法布里珀罗(F-P)腔及其真空控温系统, 通过双重控温系统实现了F-P腔在环境温度为10~40 ℃范围的精确控制, 该系统在 24 h内的温度波动约为±0.004 ℃。通过分析F-P腔的共振频率和铯原子饱和吸收谱, 获得了F-P腔的共振频率和腔体材料膨胀系数随温度的变化。通过对测得的数据进行拟合, 可以精确确定零膨胀温度为29.286±0.057 ℃。所提出的温度控制系统有望获得热稳定度为3.494×10-14的光学频率标准。
光子晶体光纤(PCF)与普通单模光纤(SMF)的低损耗熔接技术是光子晶体光纤走向实用化必须解决的关键技术问题。提出一种基于光纤拉锥模场匹配技术的光子晶体光纤低损耗熔接的新方法,利用熔融拉锥机对模场不匹配的两类PCF进行预处理,结合常规电弧放电熔接技术对三种不同类型的PCF与SMF的熔接损耗进行实验研究。在实验中通过精确控制熔融拉锥机各种参数,实现了不同模场直径PCF和SMF的模场匹配,该方案同时通过优化各种电弧放电参数,使熔接后的损耗降到了0.3 dB以下,实现了PCF-SMF之间低损耗、高强度的熔接,满
We report an experiment of adaptive compensation for first-order polarization mode dispersion (PMD) in 10-Gb/s return zero (RZ) optical communication system. The compensated differential group delay (DGD) is up to 30 ps. The quasi-real-time, less than one
对质子交换光波导生长机理进行了研究并给出了波导层厚度的计算公式。
期刊