Electrochemical properties of LiNi0.5Mn1.3Ti0.2O4/Li4Ti5O12 cells

来源 :矿物冶金与材料学报 | 被引量 : 0次 | 上传用户:yyeeq507
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Abstract:Spinel compounds LiNi0.5Mn1.3Ti0.2O4 (LNMTO) and Li4Ti5O12 (LTO) were synthesized by different methods.The particle sizes of LNMTO and LTO are 0.5-2 and 0.5-0.8 μm,respectively.The LNMTO/LTO cell exhibits better electrochemical properties at both a low current rate of 0.2C and a high current rate of 1C.When the specific capacity was determined based on the mass of the LNMTO cathode,the LNMTO/LTO cell delivered 137 mA.h.g-1at 0.2C and 118.2 mA.h·g-1at 1C,and the corresponding capacity retentions after 30 cycles are 88.5% and 92.4%,respectively.
其他文献
In the present paper,the moment Lyapunov exponent of a codimensional two-bifurcation system is evaluted,which is on a three-dimensional central manifold and sub
To explore the energy saving effect of building envelope,the experiments were carried out through a comparison of basic cubicle in summer.Experiments show that
The reduction of ilmenitc concentrate by hydrogen gas was investigated m the temperature range of 500 to 1200℃.The micro-structure and phase transition of the
(Al65Cu20Fe15)100-xSnx (x=0,12,20,30) and Al57Si10Cu18Fe15 powders were cladded on a medium carbon steel (45# steel) substrate by laser multilayer cladding,resp
Achieving simultaneous reduction of NOx,CO and unburned hydrocarbon (UHC) emissions without compromising engine performance at part loads is the current focus o
In magnetic Czochralski (MCZ) silicon growth,the distance and diameter of the electrified coils may affect the magnetic field intensity and melt flow.By changin
Optical microscopy (OM) and transmission electron microscopy (TEM) were used to investigate the effect of tempering temperature on the experimental extra-high c
This paper demonstrated our discovery of the movement effect of BiFeO3 nanoparticles in solution by strong electrical polarization.First,BiFeO3 nanoparticles we
Aging precipitation and solid solution heat treatment were carried out on three steels which have chromium content of 18%,manganese content of 12%,15%,18%,and nitro