介绍了一种金属与橡胶复合囊体制品的成型工艺。该复合囊体制品主要由密封法兰、支撑圆环、橡胶囊三部分组成,在成型过程中,首先采用热接缝的工艺方法,实现橡胶囊体的无缝成型;然后,使用专门设计的撑杆结构,将密封法兰、支撑圆环和橡胶囊定位并预成型;最后,利用硫化罐二次热硫化粘接,实现复合囊体的一体成型。与一般的冷粘成型工艺相比,该成型工艺操作简单、流程稳定、产品质量可靠。 A metal and rubber composite capsule product molding process is introduced. The composite capsule product is mainly composed of a sealing flange, a supporting ring and a rubber capsule. During the forming process, the method of hot sealing is adopted to realize the seamless molding of the rubber capsule; and then, the specially designed Pole structure, the sealing flange, the support ring and the rubber capsule positioning and pre-forming; Finally, the use of vulcanized tank secondary heat curing bonding, composite capsule body forming. Compared with the general cold-stick molding process, the molding process is simple, the process is stable, and the product quality is reliable.