论文部分内容阅读
(一) 前言目前,我国各厂矿及研究单位对防锈油脂耐湿热性能的评定按GB2361—80防锈油脂湿热试验方法标准规定进行,设备采用SY—25型湿热试验箱。但该方法所需试验时间长,往往评定一个油样需要上百至数千小时。有的甚至半年以上。所以它大多只能用于产品鉴定和仲裁试验。而对于防锈添加剂及防锈油脂试验研究,特别是工厂生产过程质量控制评定,显然是不能适应的,需要一
(I) Preface At present, all factories, mines and research institutes on the evaluation of anti-rust grease resistance to heat and humidity by GB2361-80 anti-rust grease test method for hot and humid standards, equipment used SY-25-type hot and humid chamber. However, this method requires a long test time, often weighing an oil sample needs hundreds to thousands of hours. Some even more than six months. So most of it can only be used for product identification and arbitration test. For the anti-rust additives and anti-rust grease test research, in particular, the quality control of the factory production process appraisal, apparently can not be adapted, you need a