冷压成形的线材和带钢都要经一道热处理工序 ,在热处理期间 ,带卷的各匝会出现人们所不希望的粘结。粘结通常出现在冷却开始阶段 ,发生部位一般在那些热处理时表面接触力增大、发生位移的位置上。Defox Plus工艺是针对解决发生在罩式退火炉和钟式退火炉内的带钢表面粘结而开发? Cold-formed wire and strip are subjected to a heat treatment process. During the heat treatment, the individual turns of the coil may exhibit undesirable bonding. Bonding usually occurs at the beginning of the cooling stage, and the site of occurrence is generally where the surface contact force increases and displacement occurs during heat treatment. The Defox Plus process was developed to address the bonding of the strip surface that occurs in the bell annealer and the bell annealer.