【摘 要】
：
Solidification curve of Al 8.5Fe 1.7Si was calculated by thermodynamic models. Phase constitutions of Al 8.5Fe, Al 8.5Fe 1.7Si and Al 8.5Fe 1.7Si 1.3V a
【机 构】
：
School of Materials Science and Engineering,School of Materials Science and Engineering,School of Ma
【出 处】
：
Transactions of Nonferrous Metals Society of China
论文部分内容阅读
Solidification curve of Al 8.5Fe 1.7Si was calculated by thermodynamic models. Phase constitutions of Al 8.5Fe, Al 8.5Fe 1.7Si and Al 8.5Fe 1.7Si 1.3V alloys were analysed at different cooling rates by means of optical microscopy, X ray diffraction, transmission electron microscopy and so on. Microstructures of spraying deposited ingots and their hot processed samples were detected, and the phase transitions during spraying deposition, heating process and hot processing were also studied. The results show that, by spraying deposition, the ideal structures of α (Al) and Al 12 (Fe, V) 3Si can be obtained when cooling rate is above 10 5 K/s; and restraining the formation of Al 8(Fe,V) 2Si/Al 13 Fe 4 can improve the properties of the alloy.
Solidification curve of Al 8.5Fe 1.7Si was calculated by thermodynamic models. Phase constitutions of Al 8.5Fe, Al 8.5Fe 1.7Si and Al 8.5Fe 1.7Si 1.3V alloys were analyzed at different cooling rates by means of optical microscopy, X-ray diffraction , transmission electron microscopy and so on. Microstructures of spraying deposited ingots and their hot processed samples were detected, and the phase transitions during spraying deposition, heating process and hot processing were also studied. The results show that, by spraying deposition, the ideal structures of α (Al) and Al 12 (Fe, V) 3Si can be obtained when the cooling rate is above 10 5 K / s; and restraining the formation of Al 8 (Fe, V) 2Si / Al 13 Fe 4 can improve the properties of the alloy.
其他文献
This paper presents a computational investigation of hydrodynamics,heat transfer and cracking reaction in a heavy oil riser operated in a novel operating mode o
Leakage from underground pipes could result in foundations being undermined and cause damage to adjacent infrastructure.Soil particles surrounding the leaking a
The urethane reaction of o-hydroxybenzyl alcohol with phenyl isocyanate was monitored with in situ FT-IR.Dibutyltin dilaurate was used as catalyst and its amoun
Semiconductor CdS nanoparticles were synthesized by the sonochemical reduction of a mixed aqueous solution ofCdCl2, Na2S2O3 and (CH3)2CHOH in Ar atmosphere at r
A series of novel amphibious organic/inorganic hybrid proton exchange membranes with H3PO4 doped which could be used under both wet and dry conditions was prepa
In this paper,an axial dispersion mathematical model is developed to simulate a three-phase slurry bubble column reactor for direct synthesis of dimethyl ether(
Molybdenum (Ⅵ) complex, namely molybdenum dioxobis(2,4-pentanedione) [MoO2(acac)2] used asepoxidation catalyst species, was synthesized and characterized by el
N-isopropylacrylamide (NIPAAm) was used to synthesize NIPAAm homopolymer (nonionized) andNIPAAm-sodium methacrylate copolymer (ionized). The swelling equilibria
Two structure types of LiMnO2 were synthesized by sol-gel method and ion-exchange method respectively.The results indicate that orthorhombic phase LiMnO2 is mor