【摘 要】
：
Using nerve guide conduits (NGCs) to promote the regeneration of PNI is a feasible alternative to autograft. Compared with NGCs made of single material, composite NGCs have a greater development prospect. Our previous research has confirmed that poly(D, L
【机 构】
：
Department of Pharmaceutical Engineering,School of Chemistry,Chemical Engineering and Life Science,W
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
Using nerve guide conduits (NGCs) to promote the regeneration of PNI is a feasible alternative to autograft. Compared with NGCs made of single material, composite NGCs have a greater development prospect. Our previous research has confirmed that poly(D, L-lactic acid)/β-tricalcium phosphate/hyaluronic acid/chitosan/nerve growth factor (PDLLA/β-TCP/HA/CHS/NGF) NGCs have excellent physical and chemical properties, which can slowly release NGF and support cell adhesion and proliferation. In this study, PDLLA/β-TCP/HA/CHS/NGF NGCs were prepared and used to bridge a 10 mm sciatic nerve defect in 200-250 g Sprague-Dawley (SD) rat to verify the performance of the NGCs in vivo. Substantial improvements in nerve regeneration were observed after using the PDLLA/β-TCP/HA/CHS/NGF NGCs based on gross postoperation observation, triceps wet weight analysis and nerve histological assessment. In vivo studies illustrate that the PDLLA/β-TCP/HA/CHS/NGF sustained-release NGCs can effectively promote peripheral nerve regeneration, and the effect is similar to that of autograft.
其他文献
We investigated the impure phase problem and summarized its two formation mechanisms of YAG powders synthesized via the co-precipitation method. The ions loss problem caused by high concentration reaction solution in the titration process was emphatically
The microstructure and thermal characteristics of Mg-36％Ga, Mg-43％Ga, and Mg45％Ga(wt％) alloys were investigated. The experimental results show that the microstructure of Mg-36％Ga alloy is mainly composed of primary α-Mg phase and α-Mg+Mg5Ga2 eutectic phas
Epoxy resin (EPR) was used to crosslink with Camellia oleifera Abel. protein to prepare wood adhesive, and the bonding performance and curing characteristics of which were mainly investigated, and the synthesis mechanism was also discussed by using model
Four polyaniline-tea saponin (PTS) nanocomposites were prepared by an in-situ polymerization with tea saponin (TS) as a biosurfactant, and they were used to remove organic dyes from aqueous solution. The PTS nanocomposites were characterized by using fiel
聚酰胺膜广泛应用于海水淡化、苦咸水脱盐及废水处理等领域,复杂、多类型的应用场景对膜性能提出了更高要求。氧化石墨烯(GO)以优异的机械、化学稳定性及亲水性等优点引起了学者的广泛关注。利用GO改性聚酰胺膜,可以改善膜的水通量、抗污染及耐氯性等性能。综述了聚酰胺膜在酸性和含氯溶液中的降解过程,介绍了GO结构特征,重点关注了利用GO在聚酰胺膜支撑层中、支撑层与功能层间、功能层中及功能层表面进行改性以提高膜性能的研究进展,对GO改性聚酰胺膜中金属离子及水传质过程进行了简要介绍。最后,提出未来可以从完善GO改性聚酰胺
电力、钢铁、磷肥等工业生产过程中产生大量副产石膏,如不能妥善处理而将其大量搁置,不仅造成环境污染,而且导致资源浪费.副产石膏的无害化、大综化、高质化利用,已经成为工业发展中的热点话题.对国内工业副产品石膏中脱硫石膏和磷石膏在水泥、建材、农业、化工等领域应用和技术开发现状进行了总结,并对未来工业石膏资源化利用提出了建议.以工业石膏为原料制备硫酸联产水泥、铁酸钙以及转铵法制备硫酸的工业路线具有可行性,有望实现脱硫石膏和磷石膏的大规模利用.
A new composite antibacterial material ZnO/Cu2+-Chitosan/Montmorillonite (ZCCM) was prepared with montmorillonite as carrier, Zn(Ac)2?2H2O, Cu(NO3)2?3H2O and chitosan as raw materials. ZCCM was characterized by X-ray diffraction, nitrogen physical adsorpt
数字化、智能化、网络化制造技术与装备是制造强国、网络强国建设的重要基础,是数字化车间、智能化工厂建设的重要工具,赋能制造业转型升级与高质量发展。结合航空航天领域等产品多品种变批量的特点,研究了如何更好实现数字化、智能化、网络化制造,如何更好建设数字制造车间、柔性智能制造工厂。针对单件小批量柔性化生产制造,提出了数字化智能化柔性制造生产线、车间/工厂的建设原则、实施路径和技术架构,可以用于指导建设面
根据一里坪盐湖夏季卤水主要化学组成和湖区气候特点,以Na
+,K
+,Mg
2+∥Cl
-,SO
42-—H
2O五元体系25℃介稳相图为参考,进行了一里坪盐湖夏季卤水25℃等温蒸发实验研究。实验结果表明:夏季盐湖卤水25℃等温蒸发析盐过程依次为石盐段、钾混盐段、光卤石段和水氯镁石段;锂和硼等在液相富集;结晶路线与Na
+,K
+
粉煤灰是燃煤电厂中煤粉燃烧后的固体废弃物,其日益累积不但会占用大量土地资源,还会破坏原有的自然环境,造成严重污染,近年来粉煤灰的处理和资源化利用受到广泛关注。激发粉煤灰的潜在活性是提高粉煤灰综合利用率的关键。对粉煤灰的物理活性和化学活性来源进行了介绍,并对粉煤灰活性的物理激发、水热激发及化学激发技术与激发机理进行了综述,为后续粉煤灰的活化研究和大规模利用提供了参考。不同手段均能激发粉煤灰活性,但采用单一手段激发时存在活化成本高、激发程度低等问题。未来粉煤灰激发技术将朝着多种手段并用的方向发展。