论文部分内容阅读
我厂生产的汽车离合器钢片需要铆合,以前用手工铆,劳动强度大,生产率低,质量也不能保证。群众性的技术革命开展后,技师李财宝同志设计了一台铆合机,经实际使用证明,非但能提高生产率8～9倍,而且操作方便,大大减轻劳动强度,很受工人欢迎。现在介绍出来供大家参考。见图1,电动机经皮带带动轴1,轴Ⅰ通过一组开槽的磨擦輸传动轴Ⅱ,当操作者踏下脚踏板1时,即带动一套杠杆经軸2提起輸架3,傅过渡輸4向上压紧两个槽輸5,轴Ⅱ便随着轴Ⅰ旋转。軸Ⅱ又通过一组皮带輸傅动轴Ⅲ,装在轴Ⅲ上的凸輸6便通过杠杆提起滑柱8,而锤击冲
I plant production of automotive clutch steel need riveting, previously used hand riveting, labor-intensive, low productivity, quality can not be guaranteed. After the mass technological revolution, the technician Li Caibao designed a riveting machine. Proved by actual use, not only the productivity can be increased by 8 to 9 times, but also the operation is convenient and the labor intensity is greatly reduced. It is very popular with the workers. Now introduced for your reference. See Figure 1, the motor driven by the belt shaft 1, the shaft I through a set of slotted friction transmission shaft II, when the operator depresses the pedal 1, which led a set of lever beam 2 lift frame 3, Fu transitional 4 Press up the two slots 5, and the shaft II will rotate with the shaft I. Axis II and then through a set of belt transmission shaft Ⅲ, mounted on the axis of the convex 6 6 through the lever lift strut 8, and hammer punch