【摘 要】
：
A continuous three-stage supercritical fluid extraction (SFE) process with a capacity of 1.0 kg·h-1 was setup to extract petroleum residue by pentane to obtain
【机 构】
：
State Key Laboratory of Heavy Oil Processing
论文部分内容阅读
A continuous three-stage supercritical fluid extraction (SFE) process with a capacity of 1.0 kg·h-1 was setup to extract petroleum residue by pentane to obtain more oil for further upgrading. A discharging system integrated to the bottom of the extractor was used to recover solvent as gas while asphalt was obtained as fine particles. The influence of operating conditions on the yield and quality of extracts, i.e., deasphalted oil (DAO) and resin, was studied in the range of temperature 150-220℃, pressure of 4.0-6.0 MPa and the mass ratio of solvent to oil feed (S/O) 2.5-5.0. The particle size distribution, apparent forms and the packing density, which vary with operating pressure, were measured. The particle structures were observed by SEM as well. With the modification to conventional processes, furnace can be eliminated for solvent recovery from asphalt phase, so as to reduce energy consumption.
其他文献
In this paper, selective oxidation of n-butane to maleic anhydride (MA) and partial oxidation of methane to synthesis gas with lattice oxygen instead of molecul
The interface structure, work of adhesion, and bonding character of the polar TiC/Ti interface have been examined by the first-principles density functional pla
The structure and microstructure of constituent phases in annealed IQC100-x DQCx alloys,made from mixtures of Al62 Cu25.5 Fe12.5 icosahedral quasicrystal(IQC)an
Toluene insoluble matter (TIM) in coker heavy gas oil (CHGO) from oil sands bitumen is harmful to the downstream hydrotreating, and it may be difficult to be re
The nano-TiO2/unsaturated polyester resin (referred to as nano-TiO2/UPR hereafter) was prepared with the "reaction method", by which a chemical bond generated b
Typical cationic and anionic surfactants were chosen and their interactions were calculated by quantum ular pairs with fluocarbon and hydrocarbon chain: C4H10/C
2024 aluminum alloy was implanted with nitrogen then titanium at different titanium target sputtering currents by plasma-based ion implantation(PBII).The appear
Y2O3:Eu nanotubes were synthesized by a surfactant assembly mechanism. Under ultraviolet-light excitation, the nanotubes present luminescence properties differe
This paper studies the influence of feed injection on the hydrodynamic behavior of fluid catalytic cracking riser reactors. Experiments were conducted in a cold
Background Various methods can be applied to build predictive models for the clinical data with binary outcome variable.This research aims to explore the proces