论文部分内容阅读
目前,基层单位大都使用油桶存放柴油、汽油、机油、液压油或其它油料。当机车需要加油时,有条件的就用抽油机抽油;没有条件的只好放倒油桶,打开桶盖,让油料自行流出。这种办法既浪费,油料也容易被污染。我们设制了一个简易器具,安装在油桶上用来为机车加油,收到了良好的使用效果。该器具如附图所示。由闸阀1、出油管2、旋塞3、密封圈4组成。出油管用大于25.4mm的钢管下料,穿入旋塞内孔后焊为一
At present, most grass-roots units use drums to store diesel, gasoline, engine oil, hydraulic oil or other fuel. When the locomotive needs to be refueled, it is necessary to pump the oil with a pumping unit. If there is no condition, the oil drum must be put down and the lid open to allow the oil to flow out on its own. This method is wasteful, and the fuel oil is easily polluted. We created a simple appliance that was installed on a drum to refuel the locomotive and received good results. The appliance is shown in the attached figure. By the valve 1, the oil pipe 2, cock 3, ring 4 components. Out of the pipe with more than 25.4mm of steel cutting, piercing through the hole after the screw into one