论文部分内容阅读
1.不穿带开启电源,装入录像带后不穿带。打开机盖,发现带环电机工作,用手旋动电机皮带轮,使带环有小范围的移动,再开启电源,装带盒能正常穿带。故障分析与修理①带环有卡住的地方;②带环电机或齿轮箱有故障。拆下电机及齿轮箱,用手拨动带环,能够前后平缓运动,说明带环没有卡住,故障可能在电机或齿轮箱部分。检查齿轮箱,齿轮完好,转动自如,后发现电机与齿轮箱之间的连接皮带有些松,因没有合适皮带,采用挪
1. Do not wear with the power on, do not wear tape after loading the tape. Open the cover and found the ring motor work, manually rotate the motor pulley, the ring with a small range of movement, and then turn on the power, with the box can be worn normally. Failure Analysis and Repair ① belt loop stuck; ② belt loop motor or gearbox fault. Remove the motor and gear box, hand with a dial ring, can move smoothly before and after, indicating that the belt loop is not stuck, the fault may be part of the motor or gear box. Check the gear box, gear intact, freely rotating, and found that the connection between the motor and the gear box with some loose belt, because there is no suitable belt, the use of Norwegian