在铣削过程中,往往因刀具的前面与切屑之间发生强烈摩擦,铣刀的前面易生成积屑瘤,大大地降低了铣刀使用寿命。现在我们初步合成一种配合剂,将它涂在铣刀切削部分上。铣削时,在切削部位上有一层极薄的薄膜,可以使铣刀的使用寿命延长8～9倍,零件表面光洁度也有提高。配合剂的成分用量是:玻璃纤维丝50%(研碎成粉末);石棉粉 In the milling process, often due to strong friction between the front of the tool and the chip, the front of the cutter easy to generate BUE, greatly reducing the service life of the cutter. Now we initially synthesize a compounding agent and apply it to the cutting part of the milling cutter. Milling, the cutting area has a thin layer of film, you can extend the life of the milling cutter 8 to 9 times, parts surface finish also increased. Ingredients with the amount of compounding is: 50% glass fiber (ground into powder); asbestos powder