【摘 要】
：
The ultra-high molecular mass polyethylene (UHMMPE) as an artificial joint acetabular material was filled with nano-powder of Al2O3 of various mass fractions. T
【机 构】
：
Department of Materials Science & Engineering
论文部分内容阅读
The ultra-high molecular mass polyethylene (UHMMPE) as an artificial joint acetabular material was filled with nano-powder of Al2O3 of various mass fractions. The effect of Al2O3 mass fraction on the hardness, wetting property and tribological properties of the Al2O3-UHMMPE composites under dry friction sliding against both stainless steel and Ti-6Al-4V alloy was investigated. The morphologies of the worn surfaces of composites were observed with optical microscope. The results show that, wetting property and wear resistance of the composites are improved by filling Al2O3, while the friction coefficient is decreased largely under dry friction as compared with that of the unfilled UHMMPE. This is attributed to the reinforcing function of the nano-powder of Al2O3 in the composites. The wear of UHMMPE is dominated by plowing, plastic deformation and fatigue wear; while the Al2O3-UHMMPE composites are characterized by the mild fatigue wear.
其他文献
The improvement of machining behavior of prehardened-mould steel for plastic is realized by using computer-aided composition design in this work. The results sh
The kinetics of bulk polymerization of octamethylcyclotetrasiloxane under acid circumstance is studied.A kinetic model is put forward and kinetic parameters are
A new nanometer-scale ferrite thin film with excellent high-frequency characteristics has been developed by the spray-spin-heating-coating method. The effects o
The surface oxidation films on H13 steel samples, obtained by different oxidation processes were observed by optical microscope. It is shown that the oxidation
Zirconia-ceria mixed oxide powders were prepared by high temperature aging method.The effects of the temperature and the time of aging, cerium content and calci
The mirror-confinement-type electron cyclotron resonance(MCECR) plasma source has high plasma density and high electron temperature. It is quite useful in many
With the applications of Nd-Fe-B material extending in recent years, the materials of neodymium metal and other rare earth metal alloy confront the increased de
Single phases of LnAlO3:Eu3+(Ln=Gd,Y) were obtained by the process of evaporation of their nitric acid solution, and then pyrolysis of their nitrate salts. On m
A new model based on the theoretical work of Boudh-Hir and Mansoori was developed for prediction of surface tension of pure fluids. The new model has the advant
Homoepitaxial growth of 4H-SiC on off-oriented Si-face(0001 ) substrates was performed by using the step-controlled epitaxy technique in a newly developed low-p