【摘 要】
：
Machining,especially dry machining of titanium alloys,has been one of the most significant challenges for carbide cutting tools.In this study,aluminum-rich AlTiN coating,as well as TiA1SiN nanocomposite coating,were successfully employed for dry milling o
【机 构】
：
School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China
论文部分内容阅读
Machining,especially dry machining of titanium alloys,has been one of the most significant challenges for carbide cutting tools.In this study,aluminum-rich AlTiN coating,as well as TiA1SiN nanocomposite coating,were successfully employed for dry milling of Ti-6A1-4V alloy with high efficiency and long tool life.At the cutting speeds of 150 m/min and 200 m/min,the tool life of the TiAlSiN-coated tool exceeds that of A1TiN-coated tool by 32 and 66％,respectively.The wear modes for both coated tools include the uniform flank wear,smooth wear,chipping,coating and substrate flaking,crater and notch wear,and the wear mechanisms include adhesion,diffusion,oxidation and crack.Among them,the wear mechanism is dominated by the adhesion and oxidation wear.As compared with A1TiN coating,TiA1SiN coating exhibits better mechanical properties and oxidation resistance,which contribute to a better cutting performance,fewer thermal cracks and smaller and uniform workpiece chips during the dry milling of Ti-6Al-4V alloy.
其他文献
The effect of stacking fault energy (SFE) on the grain structure evolution of face-centered cubic metals during friction stir welding was investigated by using pure aluminum,pure copper and Cu-30Zn alloy as experiment materials.Tool “stop action” and rapi
The NiTi cladding with/without Ni interlayer was prepared on stainless steel (SS) by tungsten inert gas (TIG) surfacing process,aiming at achieving good cavitation erosion resistance.The ranking according to the cavitation erosion resistance is NiTi plate
A systematic study on the wettability and interactions between superalloy melts with various Re contents and Al2O3-based ceramic moulds was presented in this paper.It was found that the increase of Re content inhibited the interfacial reactions to some ex
The microstructure and fracture toughness of weld metal under Ti-free and Ti-containing different fluxes were investigated in this study.It was found that the trace element Ti of flux in submerged arc welding produced significant influence on the fracture
Optimization of grain boundary engineering (GBE) process is explored in a Fe-20Cr-19Mn-2Mo-0.82 N high-nitrogen and nickel-free austenitic stainless steel,and its intergranular corrosion (IGC) property after GBE treatment is experimentally evaluated.The p
The inclination angle of the flake particle has a significant impact on the in-plane thermal conductivity of composites.The graphite flake/Al composites (50 vol％) with different inclination angles were fabricated via flake powder metallurgy,and the result
High-strength,corrosion-resistant,and lightweight Al-Mg alloys perform an important function in harsh coastal service environments.Corrosion resistance is generally inversely correlated with strength;hence,it is difficult to simultaneously optimize both.I
Ni-Mo-P coatings are obtained at the surface of ceramic substrate by electroless deposition using palladium as a surface catalyst.The influence of catalyst activation conditions on coatings\' properties was assessed by structural,morphological,electrica
Mg and its alloys are the lightest structural metals available and are extremely attractive for applications as lightweight components,particularly in the automobile,electronic,and aerospace industries.The global market for wrought Mg alloys has steadily
The microstructure,mechanical properties and corrosion behavior of Mg-2Zn-0.6Zr alloy under the as-cast and asextruded conditions were investigated.Microstructure analysis indicated the remarkable grain refinement by extrusion,as well as notable reduction