【摘 要】
：
In order to increase both the interracial strength and interphase region strength between TiNi wires and shape memory epoxy,a novel interface structure includin
【机 构】
：
State Key Laboratory of Nonferrous Metals and Process, General Research Institute for Nonferrous Met
论文部分内容阅读
In order to increase both the interracial strength and interphase region strength between TiNi wires and shape memory epoxy,a novel interface structure including aminated CNTs was designed.The morphology shows that after electroplating and etching,continuous and homogeneous concave-convex layers form on the surface of astreated TiNi wires,meanwhile aminated CNTs were planted on the surface which could react with shape memory epoxy at the interface region.The interfacial shear strength increases first with the CNT content rising but then a dramatic drop happens,and the maximum is obtained at CNT content of 0.6 g·L-1,which is about twice the result of acid etching TiNi wires.
其他文献
In this work,Eu(Ⅲ)-based coordination polymer (EuCP) nanosheets were successfully synthesized using tetrabutylammonium bromide (TBAB) as low-temperature molten
The cooling gradient of Mg-3Zn-1Ca-0.5Sr alloy in cast ingots under different cooling methods (air cooling,warm-water cooling and ice-water-mixture cooling) was
Nd3+/Yb3+/Tm3+ tri-doped CaTeO3 compounds were prepared by a solid-state reaction method.Bright blue up-conversion (UC) luminescence at around 476 nm,which corr
In this paper,single-phase and fine-grain hexagonal barium ferrite powder was prepared based on the optimal calcination condition.The influence of calcination c
An Al-Cu-Mg-Zr alloy,which obtained different homogenization cooling rates by changing the heat-treated sample size,was compressed to various strains at the def