【摘 要】
：
Stress controllable silicon nitride (SiNx) films deposited by plasma enhanced chemical vapor deposition (PECVD) are reported. Low stress SiNx films were deposited in both high frequency (HF) mode and dual frequency (HF/LF) mode. By optimizing process para
【机 构】
：
NationalKeyLaboratoryofFundamentalScienceofNovelMicro/NanoDeviceandSystemTechnology,ChongqingUnivers
【出 处】
：
OptoelectronicsLetters
论文部分内容阅读
Stress controllable silicon nitride (SiNx) films deposited by plasma enhanced chemical vapor deposition (PECVD) are reported. Low stress SiNx films were deposited in both high frequency (HF) mode and dual frequency (HF/LF) mode. By optimizing process parameters, stress free (-0.27 MPa) SiNx films were obtained with the deposition rate of 45.5 nm/min and the refractive index of 2.06. Furthermore, at HF/LF mode, the stress is significantly influenced by LF ratio and LF power, and can be controlled to be 10 MPa with the LF ratio of 17% and LF power of 150 W. However, LF power has a little effect on the deposition rate due to the interaction between HF power and LF power. The deposited SiNx films have good mechanical and optical properties, low deposition temperature and controllable stress, and can be widely used in integrated circuit (IC), micro-electro-mechanical systems (MEMS) and bio-MEMS.
其他文献
现有的结构光视觉测量系统中,相机和结构光投射器安装在玻璃管内部以实现全景测量,但玻璃管会导致光发生折射而带来畸变。针对上述畸变,分析了光线在两个圆柱形表面折射的过程,研究了两个异面的折射平面所带来的畸变,建立了一种全景结构光视觉测量通用畸变校正模型。采用全景结构光视觉测量系统对内径为288.50 mm的铝管进行测量,基于全景结构光视觉测量通用畸变校正模型计算铝管的内径。实验结果表明,系统的重复性精
In this Letter, we report, for the first time to our knowledge, on a continuous-wave, singly resonant optical parametric oscillator using an MgO: PPLN crystal pumped by an all-fiberized master-oscillator power amplifier structured amplified random fiber l
A number of zinc oxide (ZnO) films are deposited on silicon substrates using the magnetron sputtering method. After undergoing thermal treatment under different conditions, those films exhibit hexagonal wurtzite structures and different photoluminescent c
为了通过视觉测量的方法实现小型空间机器人协同位姿的求解,设计了基于单目视觉的协同位姿测量系统。针对复杂的太空工作条件,设计了作用范围广、精度高且稳健性强的合作靶标;设计了利用图像梯度法提取单像素边缘的算法,并通过中心匹配等约束完成了靶标识别;推导了特征点距离与位姿测量精度的关系,在此基础上提出了基于分区处理的特征点提取策略,实现了复杂条件下特征点的分区提取和准确编号,并扩展了工作距离,改善了位姿求
Nanosecond single- and multiple-pulse laser damage studies on
本文将染料激光系统模式耦合理论应用于三频或多频运转的染料激光器,得到了用“增益-损耗比”和振荡频率所含模数等参量表示的振荡条件关系式,讨论了三频染料激光的振荡状态图及其相关调谐问题.
为了在保证图像质量的前提下进一步加快毫米波全息成像的图像重建速度,提出了基于降维策略的快速反向传播重建(DR-BP)算法。基于亚毫米波单站式成像实验(280～320 GHz)以及多发多收正交阵列成像FEKO电磁仿真实验(70～80 GHz)对DR-BP算法进行验证。实验结果表明,DR-BP算法相比仅适用于单站式成像的快速傅里叶变换算法,重建图像边缘干扰少,相比传统的反向传播算法,重建速度大幅提升,
Two-dimensional metallic photonic crystal slabs with square lattice are proposed to be used for the design of waveguide bandpass filters operating in millimeter to terahertz region. Filter characteristics are studied when rod radii and lattice constants a
针对多光谱图像的空谱相关特性,提出一种基于卷积神经网络的端到端多光谱图像压缩方法。编码端,将多光谱数据整体输入到多光谱图像压缩网络中,采用卷积提取多光谱图像的主要光谱特征与空间特征,使用下采样减小特征数据的尺寸,并通过率失真优化控制光谱特征与空间特征数据的熵,使空谱特征数据分布更加紧凑,将量化后的中间特征数据进行无损熵编码得到压缩码流。解码端,码流经过熵解码、逆量化、上采样、反卷积的逆变换过程重构