表面加工是商业和科学技术领域普遍需要的,但是加工方法在过去几十年里很少变化。不但应用介质膜之前有一个清洗熔石英基片的问题,而且须在电桥重新上涂料之前除去原涂料和腐蚀物,这些共同性的表面加工技术问题是大量的。洗涤剂,化学溶液和有机溶液被广法使用。机械法有超声波法,切削法,刮削法,擦洗法,湿砂喷射法、水喷射法、干砂喷射法。电学技术有放电轰击法和电解法。加热法有时也是有效的。有一些场合已经出现需要兼顾这些传统方法的实用性。首先,对健康和环境影响的注意 Surface preparation is generally needed in commercial and scientific fields, but the processing methods have rarely changed in the past few decades. Not only is there a problem with cleaning the fused silica substrate before the dielectric film is applied, but also the original coating and corrosion must be removed before the bridge is re-coated. These common surface-processing techniques are problematic. Detergents, chemical solutions and organic solutions are widely used. Mechanical law ultrasonic method, cutting method, scraping method, scrubbing method, wet sand spraying method, water jet method, dry sand jet method. Electrical discharge discharge bombardment method and electrolysis method. Heating method is sometimes effective. There are occasions where there has been a need to take these traditional approaches into account. First, pay attention to health and environmental impact