论文部分内容阅读
最近安装了一块中凌VooDoo Rush显卡,这块2D/3D显卡的性能基本令人满意。在使用中发现此卡的发热较高,发热主要集中在两块3Dfx VooDoo芯片和一块LM317三端稳压上。没有发现有关报刊介绍过巫毒卡的发热情况,根据自己的实际使用,一旦进入3D十分钟不到3Dfx VooDoo芯片就烫得手不能摸。此卡的三端稳压没有考虑安装散热片而直接用螺针固定在底板上。三端稳压本身在满负荷情况下就是一个强发热器件,其发热量十分可观,而原件的安装方式使部分底板都热得烫手。
Recently installed a Zhong Ling VooDoo Rush graphics, this 2D / 3D graphics performance is basically satisfactory. Found in the use of this card fever, fever mainly concentrated in two 3Dfx VooDoo chip and a LM317 three-terminal regulator. Did not find the newspapers introduced voodoo fever, according to their actual use, once into the 3D ten minutes less than 3Dfx VooDoo chip too hot can not touch. This card’s three-terminal regulator does not consider the installation of heat sink and screw directly fixed on the floor. Three-terminal regulator itself is a strong heating device at full load, the heat is very impressive, and the original installation of the part of the floor are hot and hot.